Grading of Portuguese Maritime Pine Small-Diameter Roundwood
- 1 February 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
Abstract
This paper presents work carried out with the aim of characterizing the mechanical behavior and developing visual and machine-strength grading systems for Portuguese maritime pine roundwood for structural applications. Two samples of forty maritime pine logs each were collected, one in a northern region of Portugal and another in an interior central region. After drying, the logs were visually graded and subjected to nondestructive tests, using vibration and ultrasounds, for determination of dynamic modulus of elasticity. The logs were then subjected to destructive tests for determining bending and compression strength and bending modulus of elasticity. These results were analyzed in order to identify the features to be considered in the strength grading process. From this analysis, a proposal was developed to visually grade Portuguese maritime pine roundwood in two strength grades. According to the European strength class standard for solid timber, the upper grade has similar mechanical properties to the C50 class, whereas the lower grade is similar to the C35. The machine grading showed good potential as a result of the good correlation presented between the dynamic modulus of elasticity and the mechanical properties. However, the ultrasounds showed slightly better correlation than the vibration method, whereas the last one is more practical.Keywords
This publication has 4 references indexed in Scilit:
- Mechanical Grading of Round Timber BeamsJournal of Materials in Civil Engineering, 2006
- Mechanical grading of 6-inch-diameter lodgepole pine logs for the travelers’ rest and rattlesnake creek bridgesPublished by USDA Forest Service ,2005
- Evaluation of Wood Poles Using a Free Vibration TechniqueJournal of Testing and Evaluation, 1999
- Form and treatment effects on conical roundwood tested in bendingWood Science and Technology, 1991