Wavelet analysis of bender element signals
- 1 March 2012
- journal article
- Published by Emerald in Géotechnique
- Vol. 62 (3), 243-252
- https://doi.org/10.1680/geot.9.p.052
Abstract
Accurate determination of shear wave arrival time using bender elements may be severely affected by a combination of near-field effects and reflected waves. These may mask the first arrival of the shear wave, making its detection difficult in the time domain. This paper describes an approach for measuring the shear wave arrival time through analysis of the output signal in the time-scale domain using a multi-scale wavelet transform. The local maxima lines of the wavelet transform modulus are observed at different scales, and all singularities are mathematically characterised, allowing subsequent detection of the singularity relating to the first arrival. Examples of the use of this approach on typical synthetic and experimental bender element signals are also supplied, and these results are compared with those from other time and frequency domain approaches. The wavelet approach is not affected by near-field effects, but instead is characterised by a relatively consistent singularity related to the shear wave arrival time, across a range of frequencies and noise levels. Accurate determination of shear wave arrival time using bender elements may be severely affected by a combination of near-field effects and reflected waves. These may mask the first arrival of the shear wave, making its detection difficult in the time domain. This paper describes an approach for measuring the shear wave arrival time through analysis of the output signal in the time-scale domain using a multi-scale wavelet transform. The local maxima lines of the wavelet transform modulus are observed at different scales, and all singularities are mathematically characterised, allowing subsequent detection of the singularity relating to the first arrival. Examples of the use of this approach on typical synthetic and experimental bender element signals are also supplied, and these results are compared with those from other time and frequency domain approaches. The wavelet approach is not affected by near-field effects, but instead is characterised by a relatively consistent singularity related to the shear wave arrival time, across a range of frequencies and noise levels.This publication has 21 references indexed in Scilit:
- Assessment of sample quality in soft clay using shear wave velocity and suction measurementsGéotechnique, 2010
- Fast Stacking and Phase Corrections of Shear Wave Signals in a Noisy EnvironmentJournal of Geotechnical and Geoenvironmental Engineering, 2008
- Source near-field effects and pulse tests in soil samplesGéotechnique, 2003
- Measurement of shear-wave velocity using phase-sensitive detection techniquesCanadian Geotechnical Journal, 1999
- Measurement of low-strain material damping and wave velocity with bender elements in the frequency domainCanadian Geotechnical Journal, 1998
- Analysis of Bender Element TestsGeotechnical Testing Journal, 1998
- Measurement of Shear Waves in Laboratory Specimens by Means of Piezoelectric TransducersGeotechnical Testing Journal, 1996
- Ten Lectures on WaveletsPublished by Society for Industrial & Applied Mathematics (SIAM) ,1992
- Studies of the influence of non-linear stress–strain characteristics in soil–structure interactionGéotechnique, 1986
- Decomposition of Hardy Functions into Square Integrable Wavelets of Constant ShapeSIAM Journal on Mathematical Analysis, 1984