Influence of Notch Shape and Number of Notches on the Metering Characteristics of Hydraulic Spool Valves
- 1 January 2005
- journal article
- research article
- Published by River Publishers in International Journal of Fluid Power
- Vol. 6 (2), 5-18
- https://doi.org/10.1080/14399776.2005.10781216
Abstract
The paper presents theoretical and experimental results of studies on the influence of shape and number of spool notches on the discharge characteristics (discharge coefficient, velocity coefficient and flow angle) of a hydraulic distributor metering edge. The flow-rate vs. pressure drop and the steady state axial flow-force vs. pressure drop diagrams are determined for spools with different configurations of multiple notched metering edges. Various combinations of the shape and number of the notches modulating the metering area of the passage between supply and drain ports were investigated and correlated with flow-rate, axial flow-force and pressure drop, in order to get estimates of discharge coefficient and flow angle. The procedure is applied to all the data collected during the experimental activity, and shows the behaviour of the flow characteristics in both the fully turbulent and transitional region of motion. The influence of notch shape and number on the metering edge flow characteristics is evaluated as well.Keywords
This publication has 3 references indexed in Scilit:
- Stationary Axial Flow Force Analysis on Compensated Spool ValvesInternational Journal of Fluid Power, 2000
- Analysis of hydraulic components using computational fluid dynamics modelsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1998
- Experimental Investigation of Flow and Force Characteristics of Hydraulic Poppet and Disc ValvesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1991