Cell wall structure and formation of maturing fibres of moso bamboo ( Phyllostachys pubescens ) increase buckling resistance
- 14 September 2011
- journal article
- Published by The Royal Society in Journal of The Royal Society Interface
- Vol. 9 (70), 988-996
- https://doi.org/10.1098/rsif.2011.0462
Abstract
The mechanical stability of the culms of monocotyledonous bamboos is highly attributed to the proper embedding of the stiff fibre caps of the vascular bundles into the soft parenchymatous matrix. Owing to lack of a vascular cambium, bamboos show no secondary thickening growth that impedes geometrical adaptations to mechanical loads and increases the necessity of structural optimization at the material level. Here, we investigate the fine structure and mechanical properties of fibres within a maturing vascular bundle of moso bamboo, Phyllostachys pubescens , with a high spatial resolution. The fibre cell walls were found to show almost axially oriented cellulose fibrils, and the stiffness and hardness of the central part of the cell wall remained basically consistent for the fibres at different regions across the fibre cap. A stiffness gradient across the fibre cap is developed by differential cell wall thickening which affects tissue density and thereby axial tissue stiffness in the different regions of the cap. The almost axially oriented cellulose fibrils in the fibre walls maximize the longitudinal elastic modulus of the fibres and their lignification increases the transverse rigidity. This is interpreted as a structural and mechanical optimization that contributes to the high buckling resistance of the slender bamboo culms.Keywords
This publication has 30 references indexed in Scilit:
- Mechanical characterization of single bamboo fibers with nanoindentation and microtensile techniqueHolzforschung, 2011
- Evaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentationBioresource Technology, 2010
- Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imagingJournal of Experimental Botany, 2009
- Structure–function relationships of different vascular bundle types in the stem of the Mexican fanpalm (Washingtonia robusta)New Phytologist, 2009
- Cell wall features with regard to mechanical performance. A review COST Action E35 2004–2008: Wood machining – micromechanics and fractureHolzforschung, 2008
- Stiffness gradients in vascular bundles of the palmWashingtonia robustaProceedings Of The Royal Society B-Biological Sciences, 2008
- Topochemical investigation on tension wood fibres of Acer spp., Fagus sylvatica L. and Quercus robur L.Holzforschung, 2008
- The changes in cell wall architecture during lignification of bamboo, Phyllostachys aurea Carr.Trees, 2001
- Changes in Chemical Composition within an Internode of Elongating BambooHolzforschung, 1996
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992