Assessing Behind Armor Blunt Trauma (BABT) Under NIJ Standard-0101.04 Conditions Using Human Torso Models
- 1 June 2008
- journal article
- research article
- Published by Ovid Technologies (Wolters Kluwer Health) in Journal Of Trauma-Injury Infection and Critical Care
- Vol. 64 (6), 1555-1561
- https://doi.org/10.1097/ta.0b013e318160ff3a
Abstract
Although soft armor vests serve to prevent penetrating wounds and dissipate impact energy, the potential of nonpenetrating injury to the thorax, termed behind armor blunt trauma, does exist. Currently, the ballistic resistance of personal body armor is determined by impacting a soft armor vest over a clay backing and measuring the resulting clay deformation as specified in National Institute of Justice (NIJ) Standard-0101.04. This research effort evaluated the efficacy of a physical Human Surrogate Torso Model (HSTM) as a device for determining thoracic response when exposed to impact conditions specified in the NIJ Standard. The HSTM was subjected to a series of ballistic impacts over the sternum and stomach. The pressure waves propagating through the torso were measured with sensors installed in the organs. A previously developed Human Torso Finite Element Model (HTFEM) was used to analyze the amount of tissue displacement during impact and compared with the amount of clay deformation predicted by a validated finite element model. All experiments and simulations were conducted at NIJ Standard test conditions. When normalized by the response at the lowest threat level (Level I), the clay deformations for the higher levels are relatively constant and range from 2.3 to 2.7 times that of the base threat level. However, the pressures in the HSTM increase with each test level and range from three to seven times greater than Level I depending on the organ. The results demonstrate the abilities of the HSTM to discriminate between threat levels, impact conditions, and impact locations. The HTFEM and HSTM are capable of realizing pressure and displacement differences because of the level of protection, surrounding tissue, and proximity to the impact point. The results of this research provide insight into the transfer of energy and pressure wave propagation during ballistic impacts using a physical surrogate and computational model of the human torso.Keywords
This publication has 14 references indexed in Scilit:
- Computational and experimental models of the human torso for non-penetrating ballistic impactJournal of Biomechanics, 2007
- Assessing Behind Armor Blunt Trauma in Accordance With the National Institute of Justice Standard for Personal Body Armor Protection Using Finite Element ModelingJournal Of Trauma-Injury Infection and Critical Care, 2007
- A high-frequency lung injury mechanism in blunt thoracic impactJournal of Biomechanics, 2005
- Modeling the Effect of Non-Penetrating Ballistic Impact As a Means of Detecting Behind Armor Blunt TraumaJournal Of Trauma-Injury Infection and Critical Care, 2005
- Relationship between the Dynamic Parameters and Injury Severity of Chest Subjected to ImpactJournal Of Trauma-Injury Infection and Critical Care, 1996
- Studies on the Mechanisms of Stress Wave Propagation in the Chest Subjected to Impact and Lung InjuriesJournal Of Trauma-Injury Infection and Critical Care, 1996
- A viscous tolerance criterion for soft tissue injury assessmentJournal of Biomechanics, 1988
- Trauma of lung due to impact loadJournal of Biomechanics, 1988
- Some Observations Relating to Behind-body Armour Blunt Trauma Effects Caused by Ballistic ImpactJournal Of Trauma-Injury Infection and Critical Care, 1988
- A New Nonpenetrating Ballistic InjuryAnnals of Surgery, 1978