Elastoplastic buckling analysis of rectangular thick plates by incremental and deformation theories of plasticity
- 4 September 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 229 (7), 1280-1299
- https://doi.org/10.1177/0954410014550047
Abstract
In this study, the elastoplastic buckling behavior of thick plates under uniaxial, biaxial compression/tension, pure shear and combined shear, and uniaxial compression loading are analyzed using a stability analysis based on generalized differential quadrature method. Based on first-order shear deformation plate theory and incremental and deformation theories of plasticity, the nonlinear equilibrium equations are developed. Various combinations of clamped, simply supported, and free boundary conditions are considered. The governing equations and solution domain are discretized by the generalized differential quadrature method. The results are compared with known solutions in literature to verify the established methodology and procedures. The effects of aspect, loading and thickness ratios, shear correction factor, different boundary conditions, and behavior of material on the buckling coefficient are discussed. Finally, some mode shapes of various loading and boundary conditions are illustrated.Keywords
This publication has 25 references indexed in Scilit:
- Elastoplastic buckling of circular annular plates under uniform in-plane loadingThin-Walled Structures, 2004
- INELASTIC BUCKLING OF RECTANGULAR STEEL PLATES USING A RAYLEIGH–RITZ METHODInternational Journal of Structural Stability and Dynamics, 2003
- Elastic/plastic buckling of thick platesInternational Journal of Solids and Structures, 2001
- Plastic buckling of circular cylindrical shells under combined in-plane loadsInternational Journal of Solids and Structures, 2001
- Elastic-plastic buckling analysis of rectangular plates subjected to biaxial loadsForschung im Ingenieurwesen, 2000
- Elastoplastic buckling of rectangular plates in biaxial compression/tensionInternational Journal of Mechanical Sciences, 1999
- Elastic buckling of unilaterally constrained rectangular plates in pure shearEngineering Structures, 1998
- Effect of axial loading on plastic buckling of long strips under pure shearComputers & Structures, 1998
- Elastoplastic buckling of axially compressed circular cylindrical shellsInternational Journal of Mechanical Sciences, 1992
- Inelastic buckling of plates including shear effectsInternational Journal of Solids and Structures, 1979