Improved supercooling in transient thermoelectrics
- 11 October 2004
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 85 (15), 3247-3249
- https://doi.org/10.1063/1.1806276
Abstract
We present calculations for the supercooling of a thermoelectric material during a transient current pulse. At room temperature, a standard steady-state cooler produces a maximum temperature drop of 82 K. During a current pulse, this value can be increase to about 108 K. While prior calculations focused on the optimization of the current pulse with respect to length and height, we investigate the influence of the pulse shape upon the cooling mechanism. Our results show that using a quadratic pulse form, the supercooling effect can be improved and a maximum temperature drop of 116 K can be achieved, exceeding all previously reported results by 8 K. The mechanism increases the ratio of from the previous value of 1.76 to a maximum of 2.01. The optimized pulse shape requires less energy and, therefore, prevents extensive heating of the material after the minimum temperature is reached, resulting in an increase of efficiency by approximately a factor of 2.
Keywords
This publication has 6 references indexed in Scilit:
- Supercooling of Peltier cooler using a current pulseJournal of Applied Physics, 2002
- Thermoelectromechanical refrigeration based on transient thermoelectric effectsApplied Physics Letters, 1999
- Good ThermoelectricsPublished by Elsevier BV ,1998
- Galerkin Finite Element Methods for Parabolic ProblemsSpringer Series in Computational Mathematics, 1997
- Fast transient behavior of thermoelectric coolers with high current pulse and finite cold junctionEnergy Conversion, 1979
- Experiments with Peltier Junctions Pulsed with High Transient CurrentsJournal of Applied Physics, 1963