Geo-referencing forest field plots by co-registration of terrestrial and airborne laser scanning data
- 4 April 2014
- journal article
- research article
- Published by Taylor & Francis Ltd in International Journal of Remote Sensing
- Vol. 35 (9), 3135-3149
- https://doi.org/10.1080/01431161.2014.903440
Abstract
Remote sensing plays an important role within the field of forest inventory. Airborne laser scanning (ALS) has become an effective tool for acquiring forest inventory data. In most ALS-based forest inventories, accurately positioned field plots are used in the process of relating ALS data to field-observed biophysical properties. The geo-referencing of these field plots is typically carried out by means of differential global navigation satellite systems (dGNSS), and often relies on logging times of 15–20 min to ensure adequate accuracy under different forest conditions. Terrestrial laser scanning (TLS) has been proposed as a possible tool for collection of field data in forest inventories and can facilitate rapid acquisition of these data. In the present study, a novel method for co-registration of TLS and ALS data by posterior analysis of remote-sensing data – rather than using dGNSS – was proposed and then tested on 71 plots in a boreal forest. The method relies on an initial position obtained with a recreational-grade GPS receiver, in addition to analysis of the ALS and TLS data. First, individual tree positions were derived from the remote-sensing data. A search algorithm was then used to find the best match for the TLS-derived trees among the ALS-derived trees within a search area, defined relative to the initial position. The accuracy of co-registration was assessed by comparison with an accurately measured reference position. With a search radius of 25 m and using low-density ALS data (0.7 points m−2), 82% and 51% of the TLS scans were co-registered with positional errors within 1 m and 0.5 m, respectively. By using ALS data of medium density (7.5 points m−2), 87% and 78% of the scans were co-registered with errors within 1 m and 0.5 m of the reference position, respectively. These results are promising and the method can facilitate rapid acquisition and geo-referencing of field data. Robust methods to identify and handle erroneous matches are, however, required before it is suitable for operational use.Keywords
This publication has 30 references indexed in Scilit:
- Single tree detection in heterogeneous boreal forests using airborne laser scanning and area-based stem number estimatesInternational Journal of Remote Sensing, 2012
- Estimating potential logging residues in a boreal forest by airborne laser scanningBiomass and Bioenergy, 2012
- The use of terrestrial LiDAR technology in forest science: application fields, benefits and challengesAnnals of Forest Science, 2011
- An architectural model of trees to estimate forest structural attributes using terrestrial LiDAREnvironmental Modelling & Software, 2011
- Prediction of species specific forest inventory attributes using a nonparametric semi-individual tree crown approach based on fused airborne laser scanning and multispectral dataRemote Sensing of Environment, 2010
- An application-oriented automated approach for co-registration of forest inventory and airborne laser scanning dataInternational Journal of Remote Sensing, 2010
- An Accuracy Assessment of Positions Obtained Using Survey- and Recreational-Grade Global Positioning System Receivers across a Range of Forest Conditions within the Tanana Valley of Interior AlaskaWestern Journal of Applied Forestry, 2009
- Estimation of GPS positional accuracy under different forest conditions using signal interruption probabilityJournal of Forest Research, 2007
- Assessing forest metrics with a ground-based scanning lidarCanadian Journal of Forest Research, 2004
- Application of dual-frequency GPS receivers for static surveying under tree canopiesJournal of Forest Research, 2003