Algorithm for Extracting Digital Terrain Models under Forest Canopy from Airborne LiDAR Data
Open Access
- 16 July 2014
- journal article
- research article
- Published by MDPI AG in Remote Sensing
- Vol. 6 (7), 6524-6548
- https://doi.org/10.3390/rs6076524
Abstract
Extracting digital elevationmodels (DTMs) from LiDAR data under forest canopy is a challenging task. This is because the forest canopy tends to block a portion of the LiDAR pulses from reaching the ground, hence introducing gaps in the data. This paper presents an algorithm for DTM extraction from LiDAR data under forest canopy. The algorithm copes with the challenge of low data density by generating a series of coarse DTMs by using the few ground points available and using trend surfaces to interpolate missing elevation values in the vicinity of the available points. This process generates a cloud of ground points from which the final DTM is generated. The algorithm has been compared to two other algorithms proposed in the literature in three different test sites with varying degrees of difficulty. Results show that the algorithm presented in this paper is more tolerant to low data density compared to the other two algorithms. The results further show that with decreasing point density, the differences between the three algorithms dramatically increased from about 0.5m to over 10m.Keywords
This publication has 29 references indexed in Scilit:
- Tradeoffs between lidar pulse density and forest measurement accuracyRemote Sensing of Environment, 2013
- Strategies for minimizing sample size for use in airborne LiDAR-based forest inventoryForest Ecology and Management, 2013
- Estimation of tropical rain forest aboveground biomass with small-footprint lidar and hyperspectral sensorsRemote Sensing of Environment, 2011
- A linear regression method for tree canopy height estimation using airborne lidar dataCanadian Journal of Remote Sensing, 2008
- Using LiDAR technology in forestry activitiesEnvironmental Monitoring and Assessment, 2008
- Estimating individual tree heights of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDARJournal of Forest Research, 2005
- Processing of laser scanner data—algorithms and applicationsISPRS Journal of Photogrammetry and Remote Sensing, 1999
- Airborne laser scanning—an introduction and overviewISPRS Journal of Photogrammetry and Remote Sensing, 1999
- Determination of terrain models in wooded areas with airborne laser scanner dataISPRS Journal of Photogrammetry and Remote Sensing, 1998
- Determination of mean tree height of forest stands using airborne laser scanner dataISPRS Journal of Photogrammetry and Remote Sensing, 1997