A Macroporous TiO2 Oxygen Sensor Fabricated Using Anodic Aluminium Oxide as an Etching Mask
Open Access
- 19 January 2010
- Vol. 10 (1), 670-683
- https://doi.org/10.3390/s100100670
Abstract
An innovative fabrication method to produce a macroporous Si surface by employing an anodic aluminium oxide (AAO) nanopore array layer as an etching template is presented. Combining AAO with a reactive ion etching (RIE) processes, a homogeneous and macroporous silicon surface can be effectively configured by modulating AAO process parameters and alumina film thickness, thus hopefully replacing conventional photolithography and electrochemical etch methods. The hybrid process integration is considered fully CMOS compatible thanks to the low-temperature AAO and CMOS processes. The gas-sensing characteristics of 50 nm TiO2 nanofilms deposited on the macroporous surface are compared with those of conventional plain (or non-porous) nanofilms to verify reduced response noise and improved sensitivity as a result of their macroporosity. Our experimental results reveal that macroporous geometry of the TiO2 chemoresistive gas sensor demonstrates 2-fold higher (~33%) improved sensitivity than a non-porous sensor at different levels of oxygen exposure. In addition, the macroporous device exhibits excellent discrimination capability and significantly lessened response noise at 500 °C. Experimental results indicate that the hybrid process of such miniature and macroporous devices are compatible as well as applicable to integrated next generation bio-chemical sensors.Keywords
This publication has 29 references indexed in Scilit:
- Preparation of WO3 nanoparticles and application to NO2 sensorApplied Surface Science, 2009
- TiO2 thin films as sensing gas materialsJournal of Non-Crystalline Solids, 2008
- Multi-field simulations and characterization of CMOS-MEMS high-temperature smart gas sensors based on SOI technologyJournal of Micromechanics and Microengineering, 2008
- NOx sensing properties of In2O3 thin films grown by MOCVDSensors and Actuators B: Chemical, 2008
- TiO2–SnO2 nanostructures and their H2 sensing behaviorSensors and Actuators B: Chemical, 2005
- Hotplate-based monolithic CMOS microsystems for gas detection and material characterization for operating temperatures up to 500/spl deg/CIEEE Journal of Solid-State Circuits, 2004
- The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensorsJournal of Applied Physics, 2004
- ZnO sol–gel derived porous film for CO gas sensingSensors and Actuators B: Chemical, 2003
- Synthesis of mesoporous TiO2-based powders and their gas-sensing propertiesSensors and Actuators B: Chemical, 2002
- Tin oxide gas sensor fabricated using CMOS micro-hotplates and in-situ processingIEEE Electron Device Letters, 1993