Multi-fiber needle-punched nonwoven composites: Effects of heat treatment on sound absorption performance
- 5 July 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 43 (2), 231-246
- https://doi.org/10.1177/1528083712452899
Abstract
Nonwovens have been increasingly used in car interiors for noise reduction. Most of these nonwovens are subjected to thermal treatments to give the nonwovens their final three-dimensional forms. Therefore, it became crucial to investigate the effects of thermal treatment on sound absorption characteristics of nonwovens. In this study, the effects of the material and treatment parameters on airflow resistivity and normal-incidence sound absorption coefficient of thermally treated three-layered nonwoven composites have been studied. The material parameters included fiber size and porosity. The treatment factors included the temperature and duration. The thermally treated three-layered nonwoven composites are classified into three types based on the material content and fiber blend. Sandwich structures consisting of polylactide/hemp/polylactide and polypropylene/glassfiber/polypropylene layers were called LHL and PGP, respectively. The sample which consisted of three layers of an intimate blend of polypropylene-glassfiber was named as PGI. Both temperature and duration of thermal treatment have been found to affect air flow resistivity and sound absorption. An increase in air flow resistivity and a decrease in sound absorption have been detected with heat treatment. A similarity has been observed between the thermal behaviors of PGP and PGI, which included the same thermoplastic polymer fiber. Variation in air flow resistivity of sandwich structure nonwoven composites increased with the increase in temperature, which was not observed in the intimate blend ones. The air flow resistivity of heat-treated nonwovens followed a steeper trend compared to unheated nonwovens per change in material parameters. In terms of treatment parameters, the difference between the thermal treatment and the melting point of the thermoplastics constituent of the nonwoven composite was found to be a significant factor on sound absorption. This effect of treatment temperature on sound absorption changed with treatment duration. The sound absorptive characteristic of the nonwoven composites in terms of sound frequency underwent a change with thermal treatment due to the structural changes with exposure to high temperature.Keywords
This publication has 9 references indexed in Scilit:
- Effects of material and treatment parameters on noise‐control performance of compressed three‐layered multifiber needle‐punched nonwovensJournal of Applied Polymer Science, 2011
- Effects of porosity, fiber size, and layering sequence on sound absorption performance of needle‐punched nonwovensJournal of Applied Polymer Science, 2011
- Sound absorption and viscoelastic property of acoustical automotive nonwovens and their plasma treatmentFibers and Polymers, 2010
- Development of Natural Fiber Nonwovens for Application as Car Interiors for Noise ControlJournal of Industrial Textiles, 2010
- Mechanical and acoustic performance of compression‐molded open‐cell polypropylene foamsJournal of Applied Polymer Science, 2009
- Spunlaced Flax/Polypropylene Nonwoven as Auto Interior Material: Mechanical PerformanceJournal of Industrial Textiles, 2008
- Natural Fibers for Automotive Nonwoven CompositesJournal of Industrial Textiles, 2005
- Effects of compression on the sound absorption of fibrous materialsApplied Acoustics, 2000
- Acoustical properties of fibrous absorbent materialsApplied Acoustics, 1970