Flow Analysis and Assessment of Loss Models in the Symmetric Volute of a Turbo-Blower
- 1 January 2012
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 134 (1), 011101
- https://doi.org/10.1115/1.4005670
Abstract
The objectives of the present study were to investigate the flow structure and assess the accuracy of loss correlations in the symmetric volute of a turbo-blower using 3D steady flow analysis methods. To accurately model the flow field in the volute, an impeller with a single blade, a diffuser with 13 vanes, and a volute were used as the calculation domains for the computational fluid dynamics (CFD) simulations. Numerical results were validated by comparison with experimental results for the performance of a turbo-blower operated under three operating conditions: high (0.38 kg/s), normal (0.3 kg/s), and low (0.23 kg/s) mass flow rates. The accuracy of the loss correlation sets reported in four previous studies was compared with the CFD simulation predictions. These comparisons showed that the correlation sets did not accurately represent the total pressure loss in the symmetric volute of a turbo-blower, and a modified correlation set that included adjustments for the loss coefficients was proposed. Detailed investigations of the simulated flow fields were compared to understand the flow characteristics in the volute under the designed operating conditions.Keywords
This publication has 12 references indexed in Scilit:
- Numerical study and experimental validation of the performance of two different volutes with the same compressor impellerProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2009
- Development and Design of a Centrifugal Compressor VoluteInternational Journal of Rotating Machinery, 2005
- A Numerical Investigation on the Volute/Diffuser Interaction Due to the Axial Distortion at the Impeller ExitJournal of Fluids Engineering, 2001
- Pressure recovery in a turbocharger compressor voluteProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2000
- Improved Model for the Design and Analysis of Centrifugal Compressor VolutesJournal of Turbomachinery, 1999
- Numerical Simulation of Impeller–Volute Interaction in Centrifugal CompressorsJournal of Turbomachinery, 1999
- Experimental and Numerical Investigation of the Flow in a Centrifugal Compressor VoluteJournal of Turbomachinery, 1999
- Three-Dimensional Unsteady Flow and Forces in Centrifugal Impellers With Circumferential Distortion of the Outlet Static PressureJournal of Turbomachinery, 1997
- Numerical Analysis of the Three-Dimensional Swirling Flow in Centrifugal Compressor VolutesJournal of Turbomachinery, 1994
- Experimental and Theoretical Analysis of the Flow in a Centrifugal Compressor VoluteJournal of Turbomachinery, 1993