Improving the Thromboresistivity of Chemical Sensors via Nitric Oxide Release: Fabrication and in Vivo Evaluation of NO-Releasing Oxygen-Sensing Catheters
- 17 February 2000
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 72 (6), 1119-1126
- https://doi.org/10.1021/ac991370c
Abstract
The development and in vivo analytical performance of a nitric oxide (NO)-releasing amperometric oxygen sensor with greatly enhanced thromboresistivity are reported. Gas permeable coatings formulated with cross-linked silicone rubber (SR) containing NO-generating compounds (diazeniumdiolates) are shown to release NO for extended periods of time (>20 h) while reducing platelet adhesion and activation. Oxygen-sensing catheters prepared by dip-coating the NO-releasing films over the outer SR tubes of the implantable devices display similar analytical response properties in vitro (sensitivity, selectivity, response times) when compared to analogous sensors prepared without the NO release coatings. Superior analytical accuracy (relative to blood PO2 values measured in vitro) and greatly reduced thrombus formation on the outer surface of the sensors are observed in vivo (in canine model) with the NO release PO2 sensors compared to control sensors (without NO release) implanted simultaneously within the same animals. Based on these preliminary studies, the use of NO release polymers to fabricate catheter-style chemical sensors may be a potential solution to lingering biocompatibility and concomitant performance problems encountered when attempting to employ such devices for continuous intravascular measurements of blood gases and electrolytes.Keywords
This publication has 25 references indexed in Scilit:
- Thromboresistant Chemical Sensors Using Combined Nitric Oxide Release/Ion Sensing Polymeric FilmsJournal of the American Chemical Society, 1997
- Bio‐/haemocompatibility: implications and outcomes for sensors?Acta Anaesthesiologica Scandinavica, 1995
- Simplified dual-lumen catheter design for simultaneous potentiometric monitoring of carbon dioxide and pHAnalytical Chemistry, 1994
- Continuous measurement of blood gases using a combined electrochemical and spectrophotometric sensorJournal of Medical Engineering & Technology, 1994
- In vivo blood-gas and electrolyte sensors: Progress and challengesTrAC Trends in Analytical Chemistry, 1993
- New Whole Blood Analyzers and Their Impact on Cardiac and Critical CareCritical Reviews in Clinical Laboratory Sciences, 1993
- Progress in the development of a fluorescent intravascular blood gas system in manJournal of Clinical Monitoring and Computing, 1990
- Development and analytical performance of tubular polymer membrane electrode-based carbon dioxide cathetersAnalytical Chemistry, 1986
- Continuous polarographic monitoring of intra-arterial oxygen in the perioperative periodCritical Care Medicine, 1985
- Complications of umbilical oxygen electrodesThe Journal of Pediatrics, 1974