Facile synthesis of MWCNT–ZnFe2O4 nanocomposites as anode materials for lithium ion batteries
- 18 May 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (27), 13674-13681
- https://doi.org/10.1039/c2jm31905e
Abstract
Monodisperse ZnFe2O4 nanoparticles with sizes less than 10 nm have been successfully assembled on multi-walled carbon nanotubes (MWCNTs) by in situ high-temperature decomposition of the precursor iron(III) acetylacetonate, zinc acetate and MWCNTs in polyol solution. A possible formation mechanism was proposed, which suggests that the ZnFe2O4 nanoparticles are formed on the surface of MWCNTs through an aggregation thermochemical reaction process between ZnO and γ-Fe2O3 subparticles. It was found that the coverage density on the MWCNTs could be easily controlled by changing the concentration of the precursor. As anode materials for Li-ion batteries, the MWCNT–ZnFe2O4 nanocomposites showed high rate capability and superior cycling stability with a specific capacity of 1152 mA h g−1, which was much higher than that of ZnFe2O4 nanoparticles. The MWCNTs served as good electron conductors and volume buffers in improving the lithium performance of MWCNT–ZnFe2O4 nanocomposites during the discharge–charge process. Magnetic measurements showed that the MWCNT–ZnFe2O4 nanocomposites are superparamagnetic at room temperature and the magnetization of the samples can be controlled by the reaction conditions. The as-synthesized MWCNT–ZnFe2O4 nanocomposites are water dispersible and can be manipulated by an external magnetic field. Therefore, the nanocomposites have significant potential for application in the fields of energy storage, composites, wastewater treatment and biomaterials.Keywords
This publication has 30 references indexed in Scilit:
- Synthesis of porous hollow Fe3O4 beads and their applications in lithium ion batteriesJournal of Materials Chemistry, 2012
- High capacity anode materials for Li-ion batteries based on spinel metal oxides AMn2O4 (A = Co, Ni, and Zn)Journal of Materials Chemistry, 2011
- Ordered Mesoporous MFe2O4 (M = Co, Cu, Mg, Ni, Zn) Thin Films with Nanocrystalline Walls, Uniform 16 nm Diameter Pores and High Thermal Stability: Template-Directed Synthesis and Characterization of Redox Active TrevoriteInorganic Chemistry, 2010
- Structure and electrochemical performance of nanostructured Fe3O4/carbon nanotube composites as anodes for lithium ion batteriesElectrochimica Acta, 2009
- Li-storage and cycling properties of spinel, CdFe2O4, as an anode for lithium ion batteriesBulletin of Materials Science, 2009
- Introducing Dual Functional CNT Networks into CuO Nanomicrospheres toward Superior Electrode Materials for Lithium-Ion BatteriesChemistry of Materials, 2008
- Nanomaterials for Rechargeable Lithium BatteriesAngewandte Chemie-International Edition, 2008
- Li-storage and cyclability of urea combustion derived ZnFe2O4 as anode for Li-ion batteriesElectrochimica Acta, 2008
- CoFe2O4 and NiFe2O4 synthesized by sol–gel procedures for their use as anode materials for Li ion batteriesJournal of Power Sources, 2007
- Electrochemical Alloying of Lithium in Organic ElectrolytesJournal of the Electrochemical Society, 1971