Quantitative Mapping of the Elastic Modulus of Soft Materials with HarmoniX and PeakForce QNM AFM Modes
Top Cited Papers
- 12 November 2012
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (46), 16060-16071
- https://doi.org/10.1021/la302706b
Abstract
The modulus of elasticity of soft materials on the nanoscale is of interest when studying thin films, nanocomposites, and biomaterials. Two novel modes of atomic force microscopy (AFM) have been introduced recently: HarmoniX and PeakForce QNM. Both modes produce distribution maps of the elastic modulus over the sample surface. Here we investigate the question of how quantitative these maps are when studying soft materials. Three different polymers with a macroscopic Young’s modulus of 0.6–0.7 GPa (polyurethanes) and 2.7 GPa (polystyrene) are analyzed using these new modes. The moduli obtained are compared to the data measured with the other commonly used techniques, dynamic mechanical analyzer (DMA), regular AFM, and nanoindenter. We show that the elastic modulus is overestimated in both the HarmoniX and PeakForce QNM modes when using regular sharp probes because of excessively overstressed material in the samples. We further demonstrate that both AFM modes can work in the linear stress–strain regime when using a relatively dull indentation probe (starting from ∼210 nm). The analysis of the elasticity models to be used shows that the JKR model should be used for the samples considered here instead of the DMT model, which is currently implemented in HarmoniX and PeakForce QNM modes. Using the JKR model and∼240 nm AFM probe in the PeakForce QNM mode, we demonstrate that a quantitative mapping of the elastic modulus of polymeric materials is possible. A spatial resolution of ∼50 nm and a minimum 2 to 3 nm indentation depth are achieved.Keywords
This publication has 85 references indexed in Scilit:
- Polyethylene glycol-conjugated hyaluronic acid-ceramide self-assembled nanoparticles for targeted delivery of doxorubicinBiomaterials, 2012
- Smart Nanocarrier Based on PEGylated Hyaluronic Acid for Cancer TherapyACS Nano, 2011
- Nanomechanical properties of α-synuclein amyloid fibrils: a comparative study by nanoindentation, harmonic force microscopy, and Peakforce QNMNanoscale Research Letters, 2011
- Atomic force microscopy detects differences in the surface brush of normal and cancerous cellsNature Nanotechnology, 2009
- Spherical indentation of soft matter beyond the Hertzian regime: numerical and experimental validation of hyperelastic modelsBiomechanics and Modeling in Mechanobiology, 2008
- Mechanical strength of abalone nacre: Role of the soft organic layerJournal of the Mechanical Behavior of Biomedical Materials, 2008
- Accurately evaluating Young’s modulus of polymers through nanoindentations: A phenomenological correction factor to the Oliver and Pharr procedureApplied Physics Letters, 2006
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Review of instrumented indentationJournal of Research of the National Institute of Standards and Technology, 2003
- Effect of contact deformations on the adhesion of particlesJournal of Colloid and Interface Science, 1975