Electrolyte thickness dependence of the electrochromic behavior of ‘‘a-WO3’’ films
- 1 July 1985
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 58 (1), 564-567
- https://doi.org/10.1063/1.335663
Abstract
The electrochromic behavior of all‐solid‐state device, Au/a‐WO3/LiF/Au has been studied as a function of the thickness of LiF as electrolyte. Thickness‐dependent coloration and response time have been observed. The electrochromic coloration takes place at different stages, and a significant change in the transmittance of the tandem over a wide wavelength range (500–1000 nm) occurs. Hence, the performance of this configuration suggests the possible application of the tandem in all‐solid‐state ‘‘switchable windows’’.Keywords
This publication has 10 references indexed in Scilit:
- Physical and electrochromic properties of the amorphous and crystalline tungsten oxide thick films prepared under reducing atmosphereJournal of Applied Physics, 1984
- Sodium tungsten bronze thin films: Variation of chemical potential with sodium concentrationSolid State Ionics, 1983
- The Effect of Repeated Operation on Electrochromism in an All-Solid-State Device Using Li-Doped MgF2 Thin-Film ElectrolyteJapanese Journal of Applied Physics, 1983
- Electrochromism in a Thin-Film Device Using Li2WO4 as an Li-ElectrolyteJapanese Journal of Applied Physics, 1983
- Electrolysis in Electrochromic Devices Consisting of WO3 and MgF2 Thin FilmsJapanese Journal of Applied Physics, 1982
- Recent advances in inorganic electrochromicsSolid State Ionics, 1981
- Electrochromic cells with iridium oxide display electrodesSolid State Ionics, 1981
- Solid state electrochromism in WO3Journal of Electronic Materials, 1979
- Efficiency and humidity dependence of WO3-insulator electrochromic display structuresJournal of Applied Physics, 1979
- Chemical and electrochemical stability of WO3 electrochromic films in liquid electrolytesJournal of Electronic Materials, 1978