Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Top Cited Papers
- 23 January 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 14 (7), 1294-1301
- https://doi.org/10.1039/c3lc51360b
Abstract
The vast majority of microfluidic devices are developed in PDMS by molding (“soft lithography”) because PDMS is an inexpensive material, has physicochemical properties that are well suited for biomedical and physical sciences applications, and design cycle lengths are generally adequate for prototype development. However, PDMS molding is tediously slow and thus cannot provide the high- or medium-volume production required for the commercialization of devices. While high-throughput plastic molding techniques (e.g. injection molding) exist, the exorbitant cost of the molds and/or the equipment can be a serious obstacle for device commercialization, especially for small startups. High-volume production is not required to reach niche markets such as clinical trials, biomedical research supplies, customized research equipment, and classroom projects. Crucially, both PDMS and plastic molding are layer-by-layer techniques where each layer is produced as a result of physicochemical processes not specified in the initial photomask(s) and where the final device requires assembly by bonding, all resulting in a cost that is very hard to predict at the start of the project. By contrast, stereolithography (SL) is an automated fabrication technique that allows for the production of quasi-arbitrary 3D shapes in a single polymeric material at medium-volume throughputs (ranging from a single part to hundreds of parts). Importantly, SL devices can be designed between several groups using CAD tools, conveniently ordered by mail, and their cost precisely predicted via a web interface. Here we evaluate the resolution of an SL mail-order service and the main causes of resolution loss; the optical clarity of the devices and how to address the lack of clarity for imaging in the channels; and the future role that SL could play in the commercialization of microfluidic devices.Keywords
Funding Information
- National Institutes of Health (R01 EB009761)
This publication has 14 references indexed in Scilit:
- Commercialization of microfluidic point-of-care diagnostic devicesLab on a Chip, 2012
- Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processesAnalytical Methods, 2011
- Lab-on-a-Foil: microfluidics on thin and flexible filmsLab on a Chip, 2010
- Microfluidics: the great divideNature Methods, 2009
- Embedded micro‐channel fabrication using line‐scan stereolithographyAssembly Automation, 2005
- Automatic aligning and bonding system of PDMS layer for the fabrication of 3D microfluidic channelsSensors and Actuators A: Physical, 2005
- Development of an Assembly-free Process Based on Virtual Environment for Fabricating 3D Microfluidic Systems Using Microstereolithography TechnologyJournal of Manufacturing Science and Engineering, 2004
- Polymer microfluidic devicesTalanta, 2001
- Application of fused deposition modeling rapid prototyping system to the development of microchannelsPublished by SPIE-Intl Soc Optical Eng ,2001
- Parametric process optimization to improve the accuracy of rapid prototyped stereolithography partsInternational Journal of Machine Tools and Manufacture, 2000