Nondestructive Technique for the Characterization of the Pore Size Distribution of Soft Porous Constructs for Tissue Engineering
- 1 March 2006
- journal article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 22 (7), 3235-3242
- https://doi.org/10.1021/la051762g
Abstract
Polymer scaffolds tailored for tissue engineering applications possessing the desired pore structure require reproducible fabrication techniques. Nondestructive, quantitative methods for pore characterization are required to determine the pore size and its distribution. In this study, a promising alternative to traditional pore size characterization techniques is presented. We introduce a quantitative, nondestructive and inexpensive method to determine the pore size distribution of large soft porous solids based on the on the displacement of a liquid, that spreads without limits though a porous medium, by nitrogen. The capillary pressure is measured and related to the pore sizes as well as the pore size distribution of the narrowest bottlenecks of the largest interconnected pores in a porous medium. The measured pore diameters correspond to the narrowest bottleneck of the largest pores connecting the bottom with the top surface of a given porous solid. The applicability and reproducibility of the breakthrough technique is demonstrated on two polyurethane foams, manufactured using the thermally induced phase separation (TIPS) process, with almost identical overall porosity (60−70%) but very different pore morphology. By selecting different quenching temperatures to induce polymer phase separation, the pore structure could be regulated while maintaining the overall porosity. Depending on the quenching temperature, the foams exhibited either longitudinally oriented tubular macropores interconnected with micropores or independent macropores connected to adjacent pores via openings in the pore walls. The pore size and its distribution obtained by the breakthrough test were in excellent agreement to conventional characterization techniques, such as scanning electron microscopy combined with image analysis, BET technique, and mercury intrusion porosimetry. This technique is suitable for the characterization of the micro- and macropore structure of soft porous solids intended for tissue engineering applications. The method is sensitive for the smallest bottlenecks of the largest continuous pores throughout the scaffold that contributes to fluid flow.Keywords
This publication has 15 references indexed in Scilit:
- Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applicationsBiomaterials, 2004
- Comparison of liquid–liquid displacement porosimetry and scanning electron microscopy image analysis to characterise ultrafiltration track-etched membranesJournal of Membrane Science, 2004
- Porous alginate/hydroxyapatite composite scaffolds for bone tissue engineering: Preparation, characterization, and in vitro studiesJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Tomography studies of human foreskin fibroblasts on polymer yarnsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2003
- Determination of pore size distribution in hollow fibre membranesJournal of Membrane Science, 1999
- A liquid porosimetry technique for correlating intrinsic protein sieving: Applications in ultrafiltration processesJournal of Membrane Science, 1997
- Are pore size distributions in microfiltration membranes measurable by two-phase flow porosimetry?Journal of Membrane Science, 1996
- Pore size distributions in microporous membranes. A critical analysis of the bubble point extended methodJournal of Membrane Science, 1996
- Bubble point measurements on large areas of microporous membranesJournal of Membrane Science, 1991
- Porenweite von UltrafilternColloid and Polymer Science, 1931