$ per W metrics for thermoelectric power generation: beyond ZT
Top Cited Papers
- 18 June 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 6 (9), 2561-2571
- https://doi.org/10.1039/c3ee41504j
Abstract
Thermoelectric materials for power generation are typically compared using the dimensionless figure-of-merit ZT because it relates directly to the device efficiency. However, for practical applications, the cost of power generation – as governed by material, manufacturing, and heat exchanger costs – is also a critical factor which is not captured in ZT alone. The necessary analysis, derived herein, optimizes the coupled thermoelectric and economic problem for the leg length, L, and system fill factor, F, as functions of these costs. Fuel, operating, and maintenance costs are excluded. This optimization yields the minimum $ per W value for thermoelectric power generation and a framework for comparing materials beyond ZT. This analysis shows that even very expensive thermoelectric materials have the potential to be the most cost effective at the system level, if incorporated with sufficiently short legs and small fill factor. An approximate scaling analysis, verified using numerical calculations, gives the first closed-form, analytical expressions for optimal L and F to minimize $ per W. The analysis also delineates various cost-dominant regimes with different priorities for materials development, including: (i) a heat exchanger cost dominated regime, where ZT should be increased regardless of material or manufacturing costs; (ii) an areal cost, C′′, dominated regime at fixed F, where ZT/C′′ should be maximized, and (iii) a volumetric cost, C′′′, dominated regime at fixed F, where ZT/(kC′′′) should be maximized, reinforcing the need for low thermal conductivity, k. The cost–performance framework derived here will be applied to a number of real materials and applications in a separate manuscript.
Keywords
This publication has 15 references indexed in Scilit:
- Concentrated solar thermoelectric generatorsEnergy & Environmental Science, 2012
- Waste Heat Recovery from a Marine Waste Incinerator Using a Thermoelectric GeneratorJournal of Electronic Materials, 2012
- Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costsEnergy & Environmental Science, 2012
- Perspectives on thermoelectrics: from fundamentals to device applicationsEnergy & Environmental Science, 2011
- Nanostructure-based thermoelectric conversion: an insight into the feasibility and sustainability for large-scale deploymentNanoscale, 2011
- Cost-Efficiency Trade-off and the Design of Thermoelectric Power GeneratorsEnvironmental Science & Technology, 2011
- The thermoelectric alternativeNature Materials, 2011
- High-performance flat-panel solar thermoelectric generators with high thermal concentrationNature Materials, 2011
- Nanostructured Thermoelectrics: Big Efficiency Gains from Small FeaturesAdvanced Materials, 2010
- An inconvenient truth about thermoelectricsNature Materials, 2009