Drive electrical parameters applicability evaluation to determine loads on bridge crane lifting mechanism
Open Access
- 17 March 2022
- journal article
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 19 (1), 36-47
- https://doi.org/10.26518/2071-7296-2022-19-1-36-47
Abstract
Introduction. The problem of existing recorders of crane operation parameters in the direction of determining the intensity of work of mechanisms is revealed. The necessity of increasing the number of information sources is determined. Application of current parameters of the electric motor as a source of primary information is suggested.Materials and methods. The characteristics of the experimental setup are presented. The validity of information sources has been evaluated on the lifting mechanism. Formulas for determining the error of calculating the stator current and active power parameters and for determining the coefficient of proportionality of the load on the drive and the information parameter are given.Results. Tables and graphs of calculated mechanism load in terms of stator current and active power over the whole range of operating loads are presented. The dependence of accuracy of load determination on changes of supply mains voltage has been investigated.Conclusions. As information source of the load on the crane hoisting mechanism it is recommended to apply an active drive power. The given parameter has shown the big stability to voltage changes in comparison with a current of stator. It was possible to reach accuracy of definition of a load of 2,6 % at requirement of 3 %.Keywords
This publication has 7 references indexed in Scilit:
- Selection of a rational algorithm for data processing of the weight measuring system of a hoisting craneJournal of Physics: Conference Series, 2021
- Research of Strength, Service Life and Reliability of Crane Metal Structures: Overview and ResultsJournal of Siberian Federal University. Engineering & Technologies, 2020
- Improving the Energy Efficiency of a Lifting Crane ComplexElectrotechnical Systems and Complexes, 2020
- Motion control of a bridge crane with a load by finding its accelerationVestnik of Saint Petersburg University. Mathematics. Mechanics. Astronomy, 2020
- Calculation and Experimental Approaches to the Analysis and Provision of the Service Life and Safe Operation Life of Industrial FacilitiesOccupational Safety in Industry, 2020
- FLUCTUATIONS OF THE CARGO TRANSPORTED BY LIFTING CRANE: SIMULATION AND ANALYSISThe Russian Automobile and Highway Industry Journal, 2019
- DEVELOPMENT AND EXPERIMENTAL VERIFICATION OF THE SELF-ADJUSTMENT ALGORITHM OF THE OGSH LOAD LIMITER FOR BRIDGE CRANESThe Russian Automobile and Highway Industry Journal, 2018