Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
- 5 October 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 49 (20), 12044-12053
- https://doi.org/10.1021/acs.est.5b02805
Abstract
This study evaluated the emissions characteristics of hazardous material during fused deposition modeling type 3D printing. Particulate and gaseous materials were measured before, during, and after 3D printing in an exposure chamber. One ABS and two PLA (PLA1 and PLA2) cartridges were tested three times. For online monitoring, a scanning mobility particle sizer, light scattering instrument, and total volatile organic compound (TVOC) monitor were employed and a polycarbonate filter and various adsorbent tubes were used for offline sampling. The particle concentration of 3D printing using ABS material was 33-38 times higher than when PLA materials were used. Most particles were nanosize (<100 nm) during ABS (96%) and PLA1 (98%) use, but only 12% were nanosize for PLA2. The emissions rates were 1.61 × 10(10) ea/min and 1.67 × 10(11) ea/g cartridge with the ABS cartridge and 4.27-4.89 × 10(8) ea/min and 3.77-3.91 × 10(9) ea/g cartridge with the PLA cartridge. TVOCs were also emitted when the ABS was used (GM; 155 ppb, GSD; 3.4), but not when the PLA cartridges were used. Our results suggest that more research and sophisticated control methods, including the use of less harmful materials, blocking emitted containments, and using filters or adsorbents, should be implemented.Keywords
Funding Information
- National Research Foundation of Korea (2011-0002926, 5280-20140100)
This publication has 11 references indexed in Scilit:
- Ultrafine particle emissions from desktop 3D printersAtmospheric Environment, 2013
- Phthalate Levels in Nursery Schools and Related FactorsEnvironmental Science & Technology, 2013
- Airborne Emissions of Carcinogens and Respiratory Sensitizers during Thermal Processing of PlasticsAnnals of Work Exposures and Health, 2012
- Task-based exposure assessment of nanoparticles in the workplaceJournal of Nanoparticle Research, 2012
- A Strategy for Assessing Workplace Exposures to NanomaterialsJournal of Occupational and Environmental Hygiene, 2011
- Environmental and health hazard ranking and assessment of plastic polymers based on chemical compositionScience of The Total Environment, 2011
- Nanotoxicology: An Emerging Discipline Evolving from Studies of Ultrafine ParticlesEnvironmental Health Perspectives, 2005
- Fume generation and content of total chromium and hexavalent chromium in flux-cored arc welding.Annals of Occupational Hygiene, 2003
- Respiratory effects are associated with the number of ultrafine particles.American Journal of Respiratory and Critical Care Medicine, 1997
- EMISSIONS FROM PROCESSING THERMOPLASTICSAnnals of Work Exposures and Health, 1995