Slip-Stacked Perylenediimides as an Alternative Strategy for High Efficiency Nonfullerene Acceptors in Organic Photovoltaics
Top Cited Papers
- 10 November 2014
- journal article
- research article
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 136 (46), 16345-16356
- https://doi.org/10.1021/ja508814z
Abstract
Perylenediimide (PDI)-based acceptors offer a potential replacement for fullerenes in bulk-heterojunction (BHJ) organic photovoltaic cells (OPVs). The most promising efforts have focused on creating twisted PDI dimers to disrupt aggregation and thereby suppress excimer formation. Here, we present an alternative strategy for developing high-performance OPVs based on PDI acceptors that promote slip-stacking in the solid state, thus preventing the coupling necessary for rapid excimer formation. This packing structure is accomplished by substitution at the PDI 2,5,8,11-positions (“headland positions”). Using this design principle, three PDI acceptors, N,N-bis(n-octyl)-2,5,8,11-tetra(n-hexyl)-PDI (Hexyl-PDI), N,N-bis(n-octyl)-2,5,8,11-tetraphenethyl-PDI (Phenethyl-PDI), and N,N-bis(n-octyl)-2,5,8,11-tetraphenyl-PDI (Phenyl-PDI), were synthesized, and their molecular and electronic structures were characterized. They were then blended with the donor polymer PBTI3T, and inverted OPVs of the structure ITO/ZnO/Active Layer/MoO3/Ag were fabricated and characterized. Of these, 1:1 PBTI3T:Phenyl-PDI proved to have the best performance with Jsc = 6.56 mA/cm2, Voc = 1.024 V, FF = 54.59%, and power conversion efficiency (PCE) = 3.67%. Devices fabricated with Phenethyl-PDI and Hexyl-PDI have significantly lower performance. The thin film morphology and the electronic and photophysical properties of the three materials are examined, and although all three materials undergo efficient charge separation, PBTI3T:Phenyl-PDI is found to have the deepest LUMO, intermediate crystallinity, and the most well-mixed domains. This minimizes geminate recombination in Phenyl-PDI OPVs and affords the highest PCE. Thus, slip-stacked PDI strategies represent a promising approach to fullerene replacements in BHJ OPVs.Keywords
Funding Information
- Indo-US Science and Technology Forum
This publication has 76 references indexed in Scilit:
- Solar cell efficiency tables (version 44)Progress in Photovoltaics: Research and Applications, 2014
- From lab to fab: how must the polymer solar cell materials design change? – an industrial perspectiveEnergy & Environmental Science, 2013
- A polymer tandem solar cell with 10.6% power conversion efficiencyNature Communications, 2013
- Solution-processed small-molecule solar cells with 6.7% efficiencyNature Materials, 2011
- Outlook Brightens for Plastic Solar CellsScience, 2011
- For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%Advanced Materials, 2010
- Conjugated Polymer-Based Organic Solar CellsChemical Reviews, 2007
- Organic solar cells: An overviewJournal of Materials Research, 2004
- The path to ubiquitous and low-cost organic electronic appliances on plasticNature, 2004
- Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor HeterojunctionsScience, 1995