Temperature dependencies of high‐temperature reduction on conversion products and their isotopic signatures
- 27 April 2007
- journal article
- Published by Wiley in Rapid Communications in Mass Spectrometry
- Vol. 21 (10), 1587-1598
- https://doi.org/10.1002/rcm.2998
Abstract
High‐temperature reduction (HTR) is widely used for oxygen and hydrogen isotope determination. Decomposition of cellulose, sucrose and polyethylene foil by HTR is quantitative for temperatures around 1450°C. For lower reaction temperature production of CO2, water and the deposition of carbon inside the reactor are significant and thus the element of interest for isotopic analysis is split into different pools, leading to isotope fractionation. After reduction of cellulose or sucrose at 1125°C less than 60% of the oxygen is found as CO, which is monitored with the isotope ratio mass spectrometer to determine the δ18O value. The remaining oxygen is unevenly distributed between CO2 and H2O, preferentially as CO2. Raising the reaction temperature to 1425°C yields almost quantitative conversion of oxygen into CO and results in a 3‰ more positive δ18O value. Similarly, only 40–50% of the carbon of cellulose and sucrose is transformed into CO in the HTR reactor at 1125°C. This is far from the stoichiometric expected value of 83% for quantitative carbon transfer for cellulose and 92% for sucrose. Of the carbon 40–50% is deposited in the reactor and the remainder can be found as CO2. Based on the comparison of carbon isotope results from HTR and those obtained from combustion, we hypothesize that CO produced during the HTR originates partly from sample carbon and glassy carbon. A combined combustion and HTR carbon isotope determination may provide an insight into the intramolecular carbon distribution of organic substances. These results suggest that HTR should be carried out at temperatures above 1450°C to make sure that fractionations associated with the reduction process are minimal. If this is not possible frequent calibration is required using reference materials of the same structure as the sample. Copyright © 2007 John Wiley & Sons, Ltd.Keywords
This publication has 16 references indexed in Scilit:
- Model evaluation for reconstructing the oxygen isotopic composition in precipitation from tree ring cellulose over the last centuryChemical Geology, 2002
- Oxygen isotope ratios of oak in east England: implications for reconstructing the isotopic composition of precipitationEarth and Planetary Science Letters, 2001
- Quantitative Production of H2 by Pyrolysis of Gas Chromatographic EffluentsAnalytical Chemistry, 1998
- Oxygen Isotope Analysis of Cellulose: An Interlaboratory ComparisonAnalytical Chemistry, 1998
- A rapid on-line technique for determination of oxygen isotope composition of nitrogen-containing organic matter and waterRapid Communications in Mass Spectrometry, 1997
- High-Precision δ2H and δ18O Measurement for Water and Volatile Organic Compounds by Continuous-Flow Pyrolysis Isotope Ratio Mass SpectrometryAnalytical Chemistry, 1997
- Isotope Ratio Mass Spectrometric Method for the On-line Determination of Oxygen-18 in Organic MatterJournal of Mass Spectrometry, 1997
- On-line determination of δ18O values of organic substancesAnalytica Chimica Acta, 1996
- Compound-specific isotope analysis: extending towardOrganic Geochemistry, 1994
- The pyrolytic behaviour of organic compounds in the determination of oxygenMicrochimica Acta, 1968