Task-Based Lead Exposures and Work Site Characteristics of Bridge Surface Preparation and Painting Contractors
- 30 December 2008
- journal article
- research article
- Published by Taylor & Francis Ltd in Journal of Occupational and Environmental Hygiene
- Vol. 6 (2), 99-112
- https://doi.org/10.1080/15459620802615772
Abstract
This study of bridge painters working for small contractors in Massachusetts investigated the causes of elevated blood lead levels and assessed their exposure to lead. Bridge work sites were evaluated for a 2-week period during which personal and area air samples and information on work site characteristics and lead abatement methods were gathered. Short-duration personal inhalable samples collected from 18 tasks had geometric means (GM) of 3 μg/m3 to 7286 μg/m3. Full-shift, time-weighted average (TWA) inhalable samples (⩾6 hours) collected from selected workers and work sites had GMs of 2 μg/m3 to15,704 μg/m3; 80% of samples exceeded the permissible exposure limit (PEL) of 50 μg/m3, on average by a factor of 30. Area inhalable samples collected from three locations ranged from 2 μg/m3 to 40,866 μg/m3 from inside the containment, 2 μg/m3 to 471 μg/m3 from a distance of 6 meters from the containment. Seventy nine percent of the area samples from inside the containment exceeded the PEL on average by a factor of 140. Through observations of work site characteristics, opportunities for improving work methods were identified, particularly the institution of engineering controls (which were only occasionally present) and improvement in the design and construction of the containment structure. The high levels of airborne lead exposures indicate a potential for serious exposure hazard for workers and environmental contamination, which can be mitigated through administrative and engineering controls. Although these data were collected over 10 years ago, a 2005 regulatory review by the Occupational Safety and Health Administration (OSHA) of its lead in construction standard reported that elevated lead exposures and blood lead levels, high occurrence of noncompliance with the lead standard, and nonimplementation of newer technology especially among small painting firms employing <10 workers are still widespread. As a result, the findings of this study are still quite germane even a decade after the introduction of the new OSHA standard.Keywords
This publication has 26 references indexed in Scilit:
- Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industryJournal of Environmental Monitoring, 2004
- Trends in occupational lead exposure since the 1978 OSHA lead standardAmerican Journal of Industrial Medicine, 2004
- OSHA Compliance Issues: Evaluation of Elevated Blood Lead in a Commercial PainterApplied Occupational and Environmental Hygiene, 2003
- Evaluation and Field Calibration of the Miniram PDM-3 Aerosol Monitor for Measuring Respirable and Total Coal DustAihaj Journal, 1999
- Interlaboratory and Intralaboratory Variabilities in the Environmental Lead Proficiency Analytical Testing (ELPAT) ProgramAihaj Journal, 1997
- Authors' replyThe Annals of Occupational Hygiene, 1996
- Lead, Chromium, and Cadmium Emission Factors During Abrasive Blasting Operations by Bridge PaintersAihaj Journal, 1995
- EXACT EXPRESSIONS FOR THE BIAS AND VARIANCE OF ESTIMATORS OF THE MEAN OF A LOGNORMAL DISTRIBUTIONAihaj Journal, 1992
- Effect of aerosol size on the blood lead distribution of industrial workersAmerican Journal of Industrial Medicine, 1986
- Bias in Air Sampling Techniques Used to Measure Inhalation ExposureAihaj Journal, 1984