Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment
- 19 October 2017
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 139 (6)
- https://doi.org/10.1115/1.4038013
Abstract
A containment of a nuclear power plant is a final barrier against the release of radioactive materials and withstands internal pressure due to an accident. Buckling is a critical failure mode of an ellipsoidal head of steel containment vessel under internal pressure. First, a vessel was designed to measure buckling pressure and shape of the ellipsoidal head. Second, an experiment was successfully performed on an ellipsoidal head which has a diameter of 4797 mm, a radius-to-height ratio of 1.728, and a thickness of 5.5 mm. The initial shape and deformations of the ellipsoidal head were measured by using three-dimensional (3D) laser scanners. The detailed buckling characteristics including shapes, deformations, strains of buckles, and buckling pressures were obtained. Finally, initial buckling pressures were predicted by nonlinear finite element analysis considering the initial measured and the initial perfect shapes of the ellipsoidal head, respectively. The agreement between the initial experimental buckling pressure and that predicted by the analysis considering the initial measured shape is good.Keywords
This publication has 7 references indexed in Scilit:
- Calculations of plastic collapse load of pressure vessel using FEAJournal of Zhejiang University-SCIENCE A, 2008
- Westinghouse AP1000 advanced passive plantNuclear Engineering and Design, 2006
- Buckling Criteria for Torispherical Heads Under Internal PressureJournal of Pressure Vessel Technology, 2000
- Finite element analysis for buckling of pressure vessels with ellipsoidal headInternational Journal of Pressure Vessels and Piping, 1998
- Internally Pressurized Machined Domed Ends—a Comparison of the Plastic Buckling Predictions of the Deformation and Flow TheoriesProceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 1990
- Experimental Tests on Buckling of Torispherical Heads and Methods of Plastic Bifurcation AnalysisJournal of Pressure Vessel Technology, 1986
- Pressure testing of large-scale torispherical heads subject to knuckle bucklingInternational Journal of Pressure Vessels and Piping, 1986