Calculation of Greenhouse Gas Emissions for Highway Construction Operations by Using a Hybrid Life-Cycle Assessment Approach: Case Study for Pavement Operations
- 1 November 2011
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Construction Engineering and Management
- Vol. 137 (11), 1015-1025
- https://doi.org/10.1061/(asce)co.1943-7862.0000349
Abstract
Large quantities of greenhouse gases (GHG) are emitted in producing and acquiring materials for the construction, maintenance, and rehabilitation of highway infrastructure. The objective of this paper is to develop and illustrate a method that can be applied by state agencies to quantify the life-cycle emissions associated with different pavement designs. It applies existing life-cycle assessment (LCA) methods that integrate process-level construction data. The research emphasizes the construction phase and contributes a method that can be used to develop and analyze construction phase life-cycle inventories. It describes on-site collection of material and equipment usage data during construction and rehabilitation operations. Departing from traditional approaches that tend to use LCA as a way to compare alternative pavement materials or designs on the basis of estimated inventories, this paper proposes a shift to a context-sensitive process-based approach that uses actual observed construction data to calculate greenhouse gas emissions using a hybrid LCA. The goal is to support strategies that reduce long-term environmental impacts. A case study involving the rehabilitation of a concrete pavement was used to illustrate the proposed method. The key findings were as follows: total emissions are 787.19 and 1,383.28 MT per lane mile for Hybrid Models 1 and 2, respectively; the production of the materials, equipment, and fuel used to construct the project account for 90% and 94% of the total emissions throughout the construction phase for Hybrid Models 1 and 2, respectively; the equipment use and transportation impacts together only represent 6–10% of the total emission through the construction phase.
Keywords
This publication has 14 references indexed in Scilit:
- Global warming potential of pavementsEnvironmental Research Letters, 2009
- An integrated assessment of continuously reinforced and jointed plane concrete pavementsJournal of Engineering, Design and Technology, 2009
- Integrated Life-Cycle Assessment and Life-Cycle Cost Analysis Model for Concrete Bridge Deck ApplicationsJournal of Infrastructure Systems, 2008
- A regional version of a US economic input-output life-cycle assessment modelThe International Journal of Life Cycle Assessment, 2007
- Decision-Support Tool for Assessing the Environmental Effects of Constructing Commercial BuildingsJournal of Architectural Engineering, 2006
- Example of a Hybrid Life-Cycle Assessment of Construction ProcessesJournal of Infrastructure Systems, 2006
- Sustainable Roadway Construction: Energy Consumption and Material Waste Generation of RoadwaysPublished by American Society of Civil Engineers (ASCE) ,2005
- Life Cycle Modeling of Concrete Bridge Design: Comparison of Engineered Cementitious Composite Link Slabs and Conventional Steel Expansion JointsJournal of Infrastructure Systems, 2005
- Peer Reviewed: Economic Input–Output Models for Environmental Life-Cycle AssessmentEnvironmental Science & Technology, 1998
- Comparison of Environmental Implications of Asphalt and Steel-Reinforced Concrete PavementsTransportation Research Record: Journal of the Transportation Research Board, 1998