Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions
- 23 July 2011
- journal article
- research article
- Published by Elsevier BV in Wear
- Vol. 271 (9-10), 2693-2698
- https://doi.org/10.1016/j.wear.2010.12.019
Abstract
No abstract availableKeywords
This publication has 17 references indexed in Scilit:
- Effect of oil and water mixtures on adhesion in the wheel/rail contactProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- Experimental investigation of influential factors on adhesion between wheel and rail under wet conditionsWear, 2008
- Twin disc assessment of wheel/rail adhesionWear, 2008
- Experimental identification and characterization of the effects of contaminants in the wheel—rail contactProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- Feasibility of degraded adhesion tests in a locomotive roller rigProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- An experimental investigation of transient traction characteristics in rolling–sliding wheel/rail contacts under dry–wet conditionsWear, 2007
- A multi-layer model of low adhesion between railway wheel and railProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- Wear at the wheel/rail interface when sanding is used to increase adhesionProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2006
- An experimental study of rail corrugationWear, 2003
- Friction control between wheel and rail by means of on-board lubricationWear, 2002