Predictive Analytical Thermal Stress Modeling in Electronics and Photonics
- 4 June 2009
- journal article
- Published by ASME International in Applied Mechanics Reviews
- Vol. 62 (4), 040801
- https://doi.org/10.1115/1.3077136
Abstract
We discuss the role and the attributes of, as well as the state-of-the-art and some major findings in, the area of predictive analytical (“mathematical”) thermal stress modeling in electronic, opto-electronic, and photonic engineering. The emphasis is on packaging assemblies and structures and on simple meaningful practical models that can be (and actually have been) used in the mechanical (“physical”) design and reliability evaluations of electronic, opto-electronic, and photonic assemblies, structures, and systems. We indicate the role, objectives, attributes, merits, and shortcomings of analytical modeling and discuss its interaction with finite-element analysis (FEA) simulations and experimental techniques. Significant attention is devoted to the physics of the addressed problems and the rationale behind the described models. The addressed topics include (1) the pioneering Timoshenko’s analysis of bimetal thermostats and its extension for bimaterial assemblies of finite size and with consideration of the role of the bonding layer of finite compliance; this situation is typical for assemblies employed in electronics and photonics; (2) thermal stresses and strains in solder joints and interconnections; (3) attributes of the “global” and “local” thermal expansion (contraction) mismatch and the interaction of the induced stresses; (4) thermal stress in assemblies adhesively bonded at the ends and in assemblies (structural elements) with a low-modulus bonding layer at the ends (for lower interfacial stresses); (5) thin film systems; (6) thermal stress induced bow and bow-free assemblies subjected to the change in temperature; (7) predicted thermal stresses in, and the bow of, plastic packages of integrated circuit devices, with an emphasis on moisture-sensitive packages; (8) thermal stress in coated optical fibers and some other photonic structures; and (9) mechanical behavior of assemblies with thermally matched components (adherends). We formulate some general design recommendations for adhesively bonded or soldered assemblies subjected to thermal loading and indicate an incentive for a wider use of probabilistic methods in physical design for reliability of “high-technology” assemblies, including those subjected to thermal loading. Finally, we briefly address the role of thermal stress modeling in composite nanomaterials and nanostructures. It is concluded that analytical modeling should be used, whenever possible, along with computer-aided simulations (FEA) and accelerated life testing, in any significant engineering effort, when there is a need to analyze and design, in a fast, inexpensive, and insightful way, a viable, reliable, and cost-effective electronic, opto-electronic, or photonic assembly, package, or system.Keywords
This publication has 132 references indexed in Scilit:
- Influence of Selected Design Variables on Thermo-Mechanical Stress Distributions in Plated-Through-Hole StructuresJournal of Electronic Packaging, 1992
- A Bonded Joint Analysis for Surface Mount ComponentsJournal of Electronic Packaging, 1992
- Elastoplastic Analysis of Bimaterial Beams Subjected to Thermal LoadsJournal of Electronic Packaging, 1991
- Thermal Stresses in Layered Electrical Assemblies Bonded With SolderJournal of Electronic Packaging, 1991
- Stress Relief in Solder Joints Due to the Application of a Flex CircuitJournal of Electronic Packaging, 1991
- Strains in Aluminum-Adhesive-Ceramic TrilayersJournal of Electronic Packaging, 1990
- Solder-Glass Attachment in Cerdip/Cerquad Packages: Thermally Induced Stresses and Mechanical ReliabilityJournal of Electronic Packaging, 1990
- Deformation in Multilayer Stacked AssembliesJournal of Electronic Packaging, 1990
- Thermal Stresses in Compliantly Joined MaterialsJournal of Electronic Packaging, 1990
- Realistic Modeling of Edge Effect Stresses in Bimaterial ElementsJournal of Electronic Packaging, 1990