Integrating vacuum insulation panels in building constructions: an integral perspective
- 23 January 2007
- journal article
- Published by Emerald in Construction Innovation
- Vol. 7 (1), 38-53
- https://doi.org/10.1108/14714170710721287
Abstract
Purpose – Although vacuum insulation panels (VIPs) are thermal insulators that combine high thermal performance with limited thickness, application in the building sector is still rare due to lack of scientific knowledge on the behaviour of these panels applied in building constructions. This paper, therefore, seeks to give an overview of the requirements for and the behaviour of VIPs integrated into building components and constructions. Moreover, the interaction between different requirements on and properties of these integrated components are discussed in detail, since a desired high quality of the finished product demands an integral approach regarding all properties and requirements, especially during the design phase. Therefore, the importance of an integral design approach to application of VIPs is shown and emphasized in this paper. Design/methodology/approach – To achieve this objective, the legally and technically required properties of VIPs and especially their interrelationships have been studied, resulting in a relationship diagram. Based on these investigations of thermal- , service life- and structural-properties have been selected to be studied more elaborately using experimental set-up for structural testing and simulation software for thermal and hygrothermal testing. Findings – Two relationships between requirements or properties were found to be of principal importance for the design of façade components in which VIPs are integrated. First, thermal performance requirements strongly interact with structural performance, principally through the edge spacer of this façade component. A high thermal performance requires minimization of the thermal edge effect, in most cases reducing the structural performance of the entire panel. Second, an important relationship between thermal performance and service life has been recognised. The operating phenomenon mainly governing this interaction is thermal conductivity aging. Originality/value – Most research in the field of vacuum insulation until now has been directed towards gaining knowledge on specific properties of the product, especially on thermal and hygrothermal properties. The relationships and interactions between these properties and the structural behaviour, however, have been neglected. This paper, therefore, addresses the need for an integral design (and study) approach for the application of VIPs in architectural constructions.Keywords
This publication has 11 references indexed in Scilit:
- Experimental and numerical investigation of the thermal performance of a protected vacuum-insulation system applied to a concrete wallApplied Energy, 2006
- Vacuum insulation panels for building application: Basic properties, aging mechanisms and service lifeEnergy and Buildings, 2005
- Prediction of Service Life for Vacuum Insulation Panels with Fumed Silica Kernel and Foil CoverJournal of Thermal Envelope and Building Science, 2005
- Thermal Bridges in Vacuum-insulated Building FaçadesJournal of Thermal Envelope and Building Science, 2005
- Predictions for the Increase in Pressure and Water Content of Vacuum Insulation Panels (VIPs) Integrated into Building Constructions using Model CalculationsJournal of Thermal Envelope and Building Science, 2005
- Dependence of Thermal Conductivity on Water Content in Vacuum Insulation Panels with Fumed Silica KernelsJournal of Thermal Envelope and Building Science, 2005
- Permeation of Different Gases Through Foils used as Envelopes for Vacuum Insulation PanelsJournal of Thermal Envelope and Building Science, 2005
- Effective thermal conductivity of vacuum insulation panelsBuilding Research & Information, 2004
- Evacuated insulation panels filled with pyrogenic silica powders: properties and applicationsHigh Temperatures-High Pressures, 2001
- Two-Dimensional Heat Transfer Effects on Vacuum and Reflective InsulationsJournal of Thermal Insulation, 1991