Fouling Mechanisms in Axial Compressors
- 3 January 2012
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (3), 032401
- https://doi.org/10.1115/1.4004403
Abstract
Fouling of compressor blades is an important mechanism leading to performance deterioration in gas turbines over time. Fouling is caused by the adherence of particles to airfoils and annulus surfaces. Particles that cause fouling are typically smaller than 2 to 10 microns. Smoke, oil mists, carbon, and sea salts are common examples. Fouling can be controlled by appropriate air filtration systems, and can often be reversed to some degree by detergent washing of components. The adherence of particles is impacted by oil or water mists. The result is a build up of material that causes increased surface roughness and to some degree changes the shape of the airfoil (if the material build up forms thicker layers of deposits), with subsequent deterioration in performance. Fouling mechanisms are evaluated based on observed data, and a discussion on fouling susceptibility is provided. A particular emphasis will be on the capabilities of modern air filtration systems.Keywords
This publication has 18 references indexed in Scilit:
- Numerical Analysis of the Effects of Nonuniform Surface Roughness on Compressor Stage PerformanceJournal of Engineering for Gas Turbines and Power, 2011
- Analysis of Compressor On-Line Washing to Optimize Gas Turbine Power Plant PerformanceJournal of Engineering for Gas Turbines and Power, 2010
- Degradation Effects on Industrial Gas TurbinesJournal of Engineering for Gas Turbines and Power, 2009
- Axial Compressor Deterioration Caused by Saltwater IngestionJournal of Turbomachinery, 2007
- An Analysis of Axial Compressor Fouling and a Blade Cleaning MethodJournal of Turbomachinery, 1998
- Effect of Particle Size Distribution on Particle Dynamics and Blade Erosion in Axial Flow TurbinesJournal of Engineering for Gas Turbines and Power, 1991
- A Proposed Method for Assessing the Susceptibility of Axial Compressors to FoulingJournal of Engineering for Gas Turbines and Power, 1991
- Improved Particle Trajectory Calculations Through Turbomachinery Affected by Coal Ash ParticlesJournal of Engineering for Power, 1982
- The Influence of the Blading Surface Roughness on the Aerodynamic Behavior and Characteristic of an Axial CompressorJournal of Engineering for Power, 1980
- Studies of the Deposition of Sub-Micron Particles on Turbine BladesProceedings of the Institution of Mechanical Engineers, 1972