Cause and impact of low-frequency chirping modes in DIII-D hybrid discharges
- 3 April 2020
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 60 (11), 112009
- https://doi.org/10.1088/1741-4326/ab868c
Abstract
Significant variations in MHD activity and fast-ion transport are observed in the DIIID high-beta, steady-state hybrid discharges with a mixture of Electron Cyclotron (EC) waves and Neutral Beam Injection (NBI). When Electron Cyclotron Heating (ECH) or Current Drive (ECCD) is applied, Alfvén Eigenmodes (AEs) are usually suppressed and replaced by low-frequency bursting modes. The analysis of a recently compiled database of hybrid discharges suggests that the change of the fast-ion pressure especially the perpendicular pressure is the main factor responsible for the instability transition although the transition in some discharges can also be explained by a slight drop of the safety factor qmin. The lower ratio of fast-ion injection speed vinj to Alfvén speed valfven and slight drop of safety factor qmin during ECCD may also facilitate the transition. The database shows that AEs mainly occur when the fast-ion fraction Pf/Ptotal is less than 0.53 and vinj/valfven is greater than 0.50, while low-frequency bursting modes appear in the opposite regime. Here, Pf and Ptotal are the central fast-ion pressure from classical prediction and total plasma pressure, respectively. The correlation with qmin is weaker and qmin is around unity in all the cases. The reason why the instability transition correlates with Pf/Ptotal and vinj/valfven is that they can significantly modify the drive of low-frequency bursting modes and AEs. The explanation is supported by the observation that low-frequency bursting modes are rarely seen in the hybrids with NBI only, with EC waves and counter-NBI, or with high plasma density. A careful check of the low-frequency bursting modes suggests that they are mainly chirping (neoclassical) tearing modes [referred to as chirping (N)TM], i.e. the mode frequency firstly jumps up from the steady (N)TM frequency, then chirps down, and finally returns to the steady (N)TM frequency. Occasionally, the (N)TMs are fully stabilized and replaced with pure fishbones. The resonance condition calculation and 'Kick' model simulations suggest that (N)TMs and fishbones can interact through modification of the fast ion distribution in phase space, which influences the drive.Keywords
Funding Information
- Fusion Energy Sciences (DE-AC02-09CH11466, DE-FC02-04ER54698, DE-FG02-06ER54867)
This publication has 71 references indexed in Scilit:
- Characterization of the plasma current quench during disruptions in the National Spherical Torus ExperimentNuclear Fusion, 2009
- Fast automated analysis of high-resolution reflectometer density profiles on DIII-DNuclear Fusion, 2006
- The ‘hybrid’ scenario in JET: towards its validation for ITERNuclear Fusion, 2005
- Development, physics basis and performance projections for hybrid scenario operation in ITER on DIII-DNuclear Fusion, 2005
- Hybrid advanced scenarios: perspectives for ITER and new experiments with dominant RF heatingPlasma Physics and Controlled Fusion, 2004
- The tokamak Monte Carlo fast ion module NUBEAM in the National Transport Code Collaboration libraryComputer Physics Communications, 2004
- Beam driven Alfvén eigenmodes and fishbones in JETNuclear Fusion, 2000
- Interaction of fast particles with neoclassical tearing modesPhysics of Plasmas, 2000
- MHD induced alpha particle loss in TFTRNuclear Fusion, 1999
- Seed island of neoclassical tearing modes at ASDEX UpgradeNuclear Fusion, 1999