Impurity-induced embrittlement of heat-affected zone in welded Mo-based alloys
- 31 December 1997
- journal article
- Published by Elsevier BV in International Journal of Refractory Metals and Hard Materials
- Vol. 15 (5-6), 325-339
- https://doi.org/10.1016/s0263-4368(97)87507-5
Abstract
No abstract availableKeywords
This publication has 19 references indexed in Scilit:
- Grain boundary segregation in recrystallized molybdenum alloys and its effect on brittle intergranular fractureInternational Journal of Refractory Metals and Hard Materials, 1992
- Intergranular fracture surface analysis of molybdenumSurface and Interface Analysis, 1990
- AES analysis of grain boundary segregation and precipitation in electron beam welded molybdenum and Mo-0.56% Nb alloyVacuum, 1990
- Effect of impurities on the weldability of powder metallurgy, electron-beam melted and arc-melted molybdenum and its alloysJournal of Materials Science, 1989
- Effect of heat treatment on mechanical behavior of electron beam welded sintered molybdenumJournal of Nuclear Materials, 1989
- Tensile properties and microstructures of electron beam welded molybdenum and TZMJournal of the Less Common Metals, 1989
- Solution Hardening of Titanium Carbide by MolybdenumTransactions of the Japan Institute of Metals, 1986
- Effect of a small amount of additional carbon on the ductility of recrystallized sintered-molybdenum sheetJournal of Nuclear Materials, 1978
- On the effects of vacuum annealing and carburizing on the ductility of coarse-grained molybdenumJournal of the Less Common Metals, 1968
- CXI. Brittle fracture and yieldingThe London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 1955