Laser Sintering of Liquid Metal Nanoparticles for Scalable Manufacturing of Soft and Flexible Electronics
- 25 July 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (33), 28232-28241
- https://doi.org/10.1021/acsami.8b08722
Abstract
Soft, flexible, and stretchable electronics are needed to transmit power and track dynamic pose in next-generation wearables, soft robots, and biocompatible devices. Liquid metal has emerged as a promising material for these applications due to its high conductivity and liquid phase state at room temperature; however, surface oxidation of liquid metal gives it unique behaviors that are often incompatible with scalable manufacturing techniques. This paper reports a rapid and scalable approach to fabricate soft and flexible electronics composed of liquid metal. Compared to other liquid metal patterning approaches, this approach has the advantages of compatibility with a variety of substrates, ease of scalability, and efficiency through automated processes. Non-conductive liquid metal nanoparticle films are sintered into electrically conductive patterns using a focused laser beam to ablate particle oxide shells and allow their liquid metal cores to escape and coalesce. The laser sintering phenomenon is investigated through comparison with focused ion beam sintering and by studying the effects of thermal propagation in sintered films. The effects of laser fluence, nanoparticle size, film thickness and substrate material on the resistance of the sintered films are evaluated. Several devices are fabricated to demonstrate the electrical stability of laser patterned liquid metal traces under flexing, multilayer circuits, and intricately patterned circuits. This work merges the precision, consistency, and speed of laser manufacturing with the material benefits of liquid conductors on elastic substrates to demonstrate decisive progress towards commercial-scale manufacturing of soft electronics.Keywords
Funding Information
- Division of Graduate Education (DGE-1333468)
- Division of Civil, Mechanical and Manufacturing Innovation (CMMI-1454284)
This publication has 60 references indexed in Scilit:
- Untethered soft roboticsNature Electronics, 2018
- Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health MonitoringACS Nano, 2017
- Soft Robotics: Review of Fluid‐Driven Intrinsically Soft Devices; Manufacturing, Sensing, Control, and Applications in Human‐Robot InteractionAdvanced Engineering Materials, 2017
- Stretchable Bioelectronics for Medical Devices and SystemsMicrosystems and Nanosystems, 2016
- Design, fabrication and control of soft robotsNature, 2015
- Wearable Electronics and Smart Textiles: A Critical ReviewSensors, 2014
- Flexible and Stretchable Electronics Paving the Way for Soft RoboticsSoft Robotics, 2014
- Flexible and Stretchable Electronics for Biointegrated DevicesAnnual Review of Biomedical Engineering, 2012
- Eutectic Gallium‐Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room TemperatureAdvanced Functional Materials, 2008
- On the resistivity and surface tension of the eutectic alloy of gallium and indiumJournal of the Less Common Metals, 1969