Stop-flow lithography in a microfluidic device
Top Cited Papers
- 21 May 2007
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 7 (7), 818-828
- https://doi.org/10.1039/b703457a
Abstract
Polymeric particles in custom designed geometries and with tunable chemical anisotropy are expected to enable a variety of new technologies in diverse areas such as photonics, diagnostics and functional materials. We present a simple, high throughput and high resolution microfluidic method to synthesize such polymeric particles. Building off earlier work that we have done on continuous flow lithography (CFL) (D. Dendukuri, D. C. Pregibon, J. Collins, T. A. Hatton, P. S. Doyle, Nat. Mater., 2006, 5, 365–369; ref. 1), we have devised and implemented a new setup that uses compressed air driven flows in preference to syringe pumps to synthesize particles using a technique that we call stop-flow lithography (SFL). A flowing stream of oligomer is stopped before polymerizing an array of particles into it, providing for much improved resolution over particles synthesized in flow. The formed particles are then flushed out at high flow rates before the cycle of stop-polymerize-flow is repeated. The high flow rates enable orders-of-magnitude improvements in particle throughput over CFL. However, the deformation of the PDMS elastomer due to the imposed pressure restricts how quickly the flow can be stopped before each polymerization event. We have developed a simple model that captures the dependence of the time required to stop the flow on geometric parameters such as the height, length and width of the microchannel, as well as on the externally imposed pressure. Further, we show that SFL proves to be superior to CFL even for the synthesis of chemically anisotropic particles with sharp interfaces between distinct sections.Keywords
This publication has 34 references indexed in Scilit:
- Multifunctional Encoded Particles for High-Throughput Biomolecule AnalysisScience, 2007
- Polymer chemistry in flow: New polymers, beads, capsules, and fibersJournal of Polymer Science Part A: Polymer Chemistry, 2006
- Continuous-flow lithography for high-throughput microparticle synthesisNature Materials, 2006
- Controlled Production of Monodisperse Double Emulsions by Two-Step Droplet Breakup in Microfluidic DevicesLangmuir, 2004
- Peer Reviewed: Barcoding the MicroworldAnalytical Chemistry, 2004
- Designing materials for biology and medicineNature, 2004
- Formation of dispersions using “flow focusing” in microchannelsApplied Physics Letters, 2003
- Dynamic Pattern Formation in a Vesicle-Generating Microfluidic DevicePhysical Review Letters, 2001
- Three-Dimensional Photonic Crystals with Non-spherical Colloids as Building BlocksAdvanced Materials, 2001
- Regular‐sized cell creation in microchannel emulsification by visual microprocessing methodJournal of Oil & Fat Industries, 1997