A study of the mechanics of microindentation using finite elements
- 1 March 1992
- journal article
- Published by Springer Science and Business Media LLC in Journal of Materials Research
- Vol. 7 (3), 618-626
- https://doi.org/10.1557/jmr.1992.0618
Abstract
In this paper the finite element method is used to explore the mechanics of the microindentation process. In the simulations discussed, aluminum and silicon are investigated both in their bulk forms and in thin film-substrate combinations. Among the quantities readily computed using this approach and given in this paper are hardness (computed using actual contact area), contact stiffness, effective composite modulus, and surface profile under load. Importantly, this investigation builds on previous work by providing a more critical examination of the amount of pileup (or sink-in) around the indenter in the fully loaded configuration, as well as the variation of the actual contact area during indenter withdrawal. A key conclusion of this study is that finite element simulations do not support the widely used assumption of constancy of area during unloading (for either bulk materials or thin film systems). Furthermore, the amount of pileup or sink-in can be appreciable. The implication of these findings is that for many situations the commonly used straight-line extrapolation of a plastic depth may render an estimate for the contact area that is quite distinct from the actual area. This assertion is demonstrated herein through comparison of hardnesses calculated using actual contact area with values calculated using the straight-line extrapolation of plastic depth.Keywords
This publication has 9 references indexed in Scilit:
- On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentationJournal of Materials Research, 1992
- Analysis of elastic and plastic deformation associated with indentation testing of thin films on substratesInternational Journal of Solids and Structures, 1988
- A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. Part II: Computational aspectsComputer Methods in Applied Mechanics and Engineering, 1988
- An investigation of hardness and adhesion of sputter-deposited aluminum on silicon by utilizing a continuous indentation testJournal of Materials Research, 1988
- Finite element simulation of indentation experimentsInternational Journal of Solids and Structures, 1988
- Elastic analysis of some punch problems for a layered mediumInternational Journal of Solids and Structures, 1987
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986
- Vickers Indentation Curves of Magnesium Oxide (MgO)Journal of Tribology, 1984
- The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profileInternational Journal of Engineering Science, 1965