Fluorinated Copolymer PCPDTBT with Enhanced Open-Circuit Voltage and Reduced Recombination for Highly Efficient Polymer Solar Cells
- 6 August 2012
- journal article
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 134 (36), 14932-14944
- https://doi.org/10.1021/ja305039j
Abstract
A novel fluorinated copolymer (F-PCPDTBT) is introduced and shown to exhibit significantly higher power conversion efficiency in bulk heterojunction solar cells with PC70BM compared to the well-known low-band-gap polymer PCPDTBT. Fluorination lowers the polymer HOMO level, resulting in high open-circuit voltages well exceeding 0.7 V. Optical spectroscopy and morphological studies with energy-resolved transmission electron microscopy reveal that the fluorinated polymer aggregates more strongly in pristine and blended layers, with a smaller amount of additives needed to achieve optimum device performance. Time-delayed collection field and charge extraction by linearly increasing voltage are used to gain insight into the effect of fluorination on the field dependence of free charge-carrier generation and recombination. F-PCPDTBT is shown to exhibit a significantly weaker field dependence of free charge-carrier generation combined with an overall larger amount of free charges, meaning that geminate recombination is greatly reduced. Additionally, a 3-fold reduction in non-geminate recombination is measured compared to optimized PCPDTBT blends. As a consequence of reduced non-geminate recombination, the performance of optimized blends of fluorinated PCPDTBT with PC70BM is largely determined by the field dependence of free-carrier generation, and this field dependence is considerably weaker compared to that of blends comprising the non-fluorinated polymer. For these optimized blends, a short-circuit current of 14 mA/cm2, an open-circuit voltage of 0.74 V, and a fill factor of 58% are achieved, giving a highest energy conversion efficiency of 6.16%. The superior device performance and the low band-gap render this new polymer highly promising for the construction of efficient polymer-based tandem solar cells.Keywords
This publication has 67 references indexed in Scilit:
- Tandem polymer solar cells featuring a spectrally matched low-bandgap polymerNature Photonics, 2012
- Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar CellsJournal of the American Chemical Society, 2011
- Fluorine Substituted Conjugated Polymer of Medium Band Gap Yields 7% Efficiency in Polymer−Fullerene Solar CellsJournal of the American Chemical Society, 2011
- Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:2′,3′-d]silole Copolymer with a Power Conversion Efficiency of 7.3%Journal of the American Chemical Society, 2011
- For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%Advanced Materials, 2010
- Polymer solar cells with enhanced open-circuit voltage and efficiencyNature Photonics, 2009
- Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cellsNature Chemistry, 2009
- Processing Additives for Improved Efficiency from Bulk Heterojunction Solar CellsJournal of the American Chemical Society, 2008
- Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiolsNature Materials, 2007
- A new class of small band gap organic polymer conductorsPolymer Bulletin, 1992