MEMS fabrication of compliant sheet for micro hexapod robots
- 1 June 2020
- journal article
- research article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 59 (SI), SIIL03
- https://doi.org/10.35848/1347-4065/ab7439
Abstract
Micro hexapod robots are desirable tools for exploring hazardous environments such as areas affected by natural disasters. Our objective is to reduce the cost of fabricating micro hexapod robots and contribute to their mass production. Conventionally, when the micro robot is assembled, it is necessary to handle, align, and assemble the micro parts, and these processes increase the fabrication cost. We propose a fabrication system in which the robot is assembled from one compliant sheet fabricated using MEMS processes. This method can streamline the processes of handling and aligning the micro parts. The joint element of the robot is composed of a compliant hinge, and the joints are driven by shape memory alloy (SMA) actuators. In this study, we assembled a hexapod robot from one compliant sheet fabricated by the MEMS processes. Furthermore, SMA actuators were attached to the robot, and testing of the joints was performed. (C) 2020 The Japan Society of Applied Physics.This publication has 19 references indexed in Scilit:
- Walknet, a bio-inspired controller for hexapod walkingBiological Cybernetics, 2013
- A novel SU-8 electrothermal microgripper based on the type synthesis of the kinematic chain method and the stiffness matrix methodJournal of Micromechanics and Microengineering, 2011
- Micromachining of an SU-8 flapping-wing flying micro-electro-mechanical systemJournal of Micromechanics and Microengineering, 2009
- Development and Application of Function Anisotropic Shape Memory AlloyJournal of the Japan Society for Precision Engineering, 2009
- A note on size effect in actuating NiTi shape memory alloys by electrical currentMaterials & Design (1980-2015), 2008
- Passive mechanical properties of legs from running insectsJournal Of Experimental Biology, 2006
- Development of Functional Anisotropic Shape Memory Alloy Fiber and ApplicationDenki-Seiko[Electric Furnace Steel], 2006
- Development of a Shape-Memory-Alloy Actuated Biomimetic HydrofoilJournal of Intelligent Material Systems and Structures, 2002
- On the selection of shape memory alloys for actuatorsMaterials & Design (1980-2015), 2001
- Insect-model based microrobot with elastic hingesJournal of Microelectromechanical Systems, 1994