Development of physical-based demand response-enabled residential load models
- 13 August 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 28 (2), 607-614
- https://doi.org/10.1109/tpwrs.2012.2208232
Abstract
In order to support the growing interest in demand response (DR) modeling and analysis, there is a need for physical-based residential load models. The objective of this paper is to present the development of such load models at the appliance level. These include conventional controllable loads, i.e., space cooling/space heating, water heater, clothes dryer and electric vehicle. Validation of the appliance-level load models is carried out by comparing the models' output with the real electricity consumption data for the associated appliances. The appliance-level load models are aggregated to generate load profiles for a distribution circuit, which are validated against the load profiles of an actual distribution circuit. The DR-sensitive load models can be used to study changes in electricity consumption both at the household and the distribution circuit levels, given a set of customer behaviors and/or signals from a utility.Keywords
This publication has 18 references indexed in Scilit:
- Demand Response as a Load Shaping Tool in an Intelligent Grid With Electric VehiclesIEEE Transactions on Smart Grid, 2011
- Demand response in the UK's domestic sectorElectric Power Systems Research, 2009
- Evaluation of the impact of plug-in electric vehicle loading on distribution system operationsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2009
- Integrating Direct Load Control With Interruptible Load Management to Provide Instantaneous Reserves for Ancillary ServicesIEEE Transactions on Power Systems, 2004
- ADSM-an automated distribution system modeling tool for engineering analysesIEEE Transactions on Power Systems, 1995
- A bottom-up approach to residential load modelingIEEE Transactions on Power Systems, 1994
- Direct water heater load control-estimating program effectiveness using an engineering modelIEEE Transactions on Power Systems, 1993
- On the maximum likelihood duty cycle of an appliance and its validationIEEE Transactions on Power Systems, 1992
- Residential end-use load shape estimation from whole-house metered dataIEEE Transactions on Power Systems, 1988
- Residential Load Shape Modelling Based on Customer BehaviorIEEE Transactions on Power Apparatus and Systems, 1985