A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction
- 1 September 2001
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 16 (3), 220-227
- https://doi.org/10.1109/60.937200
Abstract
In this paper, a new approach to the direct torque control (DTC) of induction motor drives is presented. In comparison with the conventional DTC methods, the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the torque ripple and speed ripple. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations. Experimental results are illustrated in this paper confirming that the proposed DTC method has the above-mentioned features even at the low speed range down to /spl plusmn/1 r/min.Keywords
This publication has 16 references indexed in Scilit:
- High frequency switching operation of PWM inverter for direct torque control of induction motorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Direct stator flux and torque control of an induction motor: theoretical analysis and experimental resultsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1998
- The relationship between space-vector modulation and regular-sampled PWMIEEE Transactions on Industrial Electronics, 1997
- Direct torque control, induction motor vector control without an encoderIEEE Transactions on Industry Applications, 1997
- A stator flux-oriented voltage source variable-speed drive based on DC link measurementIEEE Transactions on Industry Applications, 1991
- Modelling of induction machines for electric drivesIEEE Transactions on Industry Applications, 1989
- Derivation of motor line-current waveforms from the DC-link current of an inverterIEE Proceedings B Electric Power Applications, 1989
- Direct self-control (DSC) of inverter-fed induction machineIEEE Transactions on Power Electronics, 1988
- Analysis and realization of a pulsewidth modulator based on voltage space vectorsIEEE Transactions on Industry Applications, 1988
- New sinusoidal pulsewidth-modulated invertorProceedings of the Institution of Electrical Engineers, 1975