An Ultrathin Self-Humidifying Membrane for PEM Fuel Cell Application: Fabrication, Characterization, and Experimental Analysis
- 1 July 2006
- journal article
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 110 (29), 14240-14248
- https://doi.org/10.1021/jp061955s
Abstract
An ultrathin poly(tetrafluoroethylene) (PTFE)-reinforced multilayer self-humidifying composite membrane (20 μm, thick) is developed. The membrane is composed of Nafion-impregnated porous PTFE composite as the central layer, and SiO2 supported nanosized Pt particles (Pt−SiO2) imbedded into the Nafion as the two side layers. The proton exchange membrane (PEM) fuel cell employing the self-humidifying membrane (Pt−SiO2/NP) turns out a peak power density of 1.40 W cm-2 and an open circuit voltage (OCV) of 1.032 V under dry H2/O2 condition. The excellent performance is attributed to the combined result of both the accelerated water back-diffusion in the thin membrane and the adsorbing/releasing water properties of the Pt−SiO2 catalyst in the side layers. Moreover, the inclusion of the hygroscopic Pt−SiO2 catalyst inside the membrane results in an enhanced anode self-humidification capability and also the decreased cathode polarization (accordingly an improved cell OCV). Several techniques, such as transmission electronic microscopy, scanning electronic microscopy, energy dispersive spectroscopy, thermal analysis and electrochemical impedance spectroscopy etc., are employed to characterize the Pt−SiO2/NP membrane. The results are discussed in comparison with the plain Nafion/PTFE membrane (NP). It is established that the reverse net water drag (from the cathode to the anode) across the Pt−SiO2/NP membrane reaches 0.16 H2O/H+. This implies a good hydration of the Pt−SiO2/NP membrane and thus ensures an excellent PEM fuel cell performance under self-humidification operation.Keywords
This publication has 41 references indexed in Scilit:
- Temperature Dependence of Ion and Water Transport in Perfluorinated Ionomer Membranes for Fuel CellsThe Journal of Physical Chemistry B, 2005
- Fine Morphology of Proton-Conducting IonomersThe Journal of Physical Chemistry B, 2004
- Emerging membranes for electrochemical systems: Part II. High temperature composite membranes for polymer electrolyte fuel cell (PEFC) applicationsJournal of Power Sources, 2004
- Development of novel self-humidifying composite membranes for fuel cellsJournal of Power Sources, 2003
- Properties of SPEEK based PEMs for fuel cell applicationCatalysis Today, 2003
- Kinetics of Proton Transport in WaterThe Journal of Physical Chemistry B, 2003
- Electrophysical Properties of Polymer Electrolyte Membranes: A Random Network ModelThe Journal of Physical Chemistry B, 1997
- Conductance of Nafion 117 membranes as a function of temperature and water contentSolid State Ionics, 1995
- Water‐Balance Calculations for Solid‐Polymer‐Electrolyte Fuel CellsJournal of the Electrochemical Society, 1990
- Ion Clustering and Proton Transport in Nafion Membranes and Its Applications as Solid Polymer ElectrolyteJournal of the Electrochemical Society, 1983