3D roughness profile model in fused deposition modelling
- 7 June 2013
- journal article
- Published by Emerald in Rapid Prototyping Journal
- Vol. 19 (4), 240-252
- https://doi.org/10.1108/13552541311323254
Abstract
Purpose: The paper aims to predict the surface roughness of fused deposition modelling prototypes. Since average roughness is not comprehensive, this study aims to extend the characterization to all the roughness parameters obtainable by a profilometric analysis.Design/methodology/approach: A theoretical model of the 3D profile is supplied as a function of process parameters and part shape. A suitable geometry was designed and prototyped for validation. Data were measured by a profilometer and complemented by microscopic analysis. A methodology based on the proposed model was applied to optimise prototype fabrication in two practical cases.Findings: The proposed profile is effective in describing the micro‐geometrical surface of fused deposition modelling prototypes. The third dimension enables the calculation of amplitude, spatial and hybrid roughness parameters.Research limitations/implications: Because of mathematical assumptions and technological aspects, the validity of the model presents limitations related to the deposition angle.Practical implications: The method is an effective tool in the process planning stage: it enables knowing in advance how to assure part specifications delivering a set of technical choices. Two practical applications point out the usability in the product development and process parameters optimisation.Originality/value: This work fulfils an identified need to predict a complete surface characterization of fused deposition modelling technology.Keywords
This publication has 17 references indexed in Scilit:
- Representation of surface roughness in fused deposition modelingJournal of the American Academy of Dermatology, 2009
- Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling processJournal of Zhejiang University-SCIENCE A, 2009
- Surface roughness prediction using measured data and interpolation in layered manufacturingJournal of the American Academy of Dermatology, 2009
- Fabrication direction optimization to minimize post-machining in layered manufacturingInternational Journal of Machine Tools and Manufacture, 2007
- Assessment of surface quality on textured FDM prototypesRapid Prototyping Journal, 2006
- Optimum part deposition orientation in fused deposition modelingInternational Journal of Machine Tools and Manufacture, 2004
- Real time adaptive slicing for fused deposition modellingInternational Journal of Machine Tools and Manufacture, 2003
- Improvement of surface finish by staircase machining in fused deposition modelingJournal of the American Academy of Dermatology, 2003
- Surface roughness visualisation for rapid prototyping modelsComputer-Aided Design, 2002
- Roughness parametersJournal of the American Academy of Dermatology, 2002