Use of and occupational exposure to indium in the United States.
Open Access
- 29 August 2013
- journal article
- Published by Informa UK Limited in Journal of Occupational and Environmental Hygiene
- Vol. 10 (12), 723-33
- https://doi.org/10.1080/15459624.2013.836279
Abstract
Indium use has increased greatly in the past decade in parallel with the growth of flat-panel displays, touchscreens, optoelectronic devices, and photovoltaic cells. Much of this growth has been in the use of indium tin oxide (ITO). This increased use has resulted in more frequent and intense exposure of workers to indium. Starting with case reports and followed by epidemiological studies, exposure to ITO has been linked to serious and sometimes fatal lung disease in workers. Much of this research was conducted in facilities that process sintered ITO, including manufacture, grinding, and indium reclamation from waste material. Little has been known about indium exposure to workers in downstream applications. In 2009–2011, the National Institute for Occupational Safety and Health (NIOSH) contacted 89 potential indium-using companies; 65 (73%) responded, and 43 of the 65 responders used an indium material. Our objective was to identify current workplace applications of indium materials, tasks with potential indium exposure, and exposure controls being used. Air sampling for indium was either conducted by NIOSH or companies provided their data for a total of 63 air samples (41 personal, 22 area) across 10 companies. Indium exposure exceeded the NIOSH recommended exposure limit (REL) of 0.1 mg/m3 for certain methods of resurfacing ITO sputter targets, cleaning sputter chamber interiors, and in manufacturing some inorganic indium compounds. Indium air concentrations were low in sputter target bonding with indium solder, backside thinning and polishing of fabricated indium phosphide-based semiconductor devices, metal alloy production, and in making indium-based solder pastes. Exposure controls such as containment, local exhaust ventilation (LEV), and tool-mounted LEV can be effective at reducing exposure. In conclusion, occupational hygienists should be aware that the manufacture and use of indium materials can result in indium air concentrations that exceed the NIOSH REL. Given recent findings of adverse health effects in workers, research is needed to determine if the current REL sufficiently protects workers against indium-related diseases.Keywords
This publication has 62 references indexed in Scilit:
- Serial evaluations at an indium‐tin oxide production facilityAmerican Journal of Industrial Medicine, 2012
- Indium Lung DiseaseChest, 2012
- The Recovery of Indium Metal from ITO-scrap using Hydrothermal Reaction in Alkaline SolutionBulletin of the Korean Chemical Society, 2011
- Recoveries of Metallic Indium and Tin from ITO by Means of PyrometallurgyHigh Temperature Materials and Processes, 2011
- Pulmonary Alveolar Proteinosis in Workers at an Indium Processing FacilityAmerican Journal of Respiratory and Critical Care Medicine, 2010
- Recovery of valuable materials from waste liquid crystal display panelWaste Management, 2009
- EMBRYOTOXIC AND TERATOGENIC EFFECTS OF INDIUM CHLORIDE IN RATS AND RABBITSJournal of Toxicology and Environmental Health, Part A, 2000
- MOCVD technology for semiconductorsMaterials Letters, 1997
- Acute Pulmonary Toxicity of Copper Gallium Diselenide, Copper Indium Diselenide, and Cadmium Telluride Intratracheally Instilled into RatsEnvironmental Research, 1995
- Tissue distribution and elimination of indium in male fischer 344 rats following oral and intratracheal administration of indium phosphideJournal of Toxicology and Environmental Health, 1994