Permanent ground deformation (PGD) is one of the most damaging hazards for continuous buried lifelines. This hazard is especially severe when the PGD results in net compression in the pipe. In that case, buckling of pipe material can occur. In this paper, centrifuge tests of buried pipelines subject to abrupt ground failure in the form of surface faulting are presented. The fault movement results mainly in compression in the pipe. The test results are compared with a case history of pipe failure in the 1999 Izmit, Turkey earthquake and also with the results from the centrifuge tests which result in net tension in the pipe. The experimental setup, procedures, and instrumentation are described in detail. Suggestions for design practice are offered based on the analysis of results from both the 1999 Izmit case history and the centrifuge modeling.