Thermal Analysis of a Pipe Insulation with a Phase Change Material: Material Selection and Sizing
- 14 July 2008
- journal article
- research article
- Published by Informa UK Limited in Heat Transfer Engineering
- Vol. 29 (7), 624-631
- https://doi.org/10.1080/01457630801922469
Abstract
This research investigates the thermal characteristics of a thermal insulation for a pipe with a phase change material (PCM) for an unsteady operating condition. A layer of the PCM located at the inner surface of the insulation is aimed to minimize the heat loss from the pipe by absorbing and storing the heat loss in the form of latent and sensible heats. A convection boundary condition is applied at the inner and outer surfaces of the insulation, and one-dimensional finite element method is utilized to solve the problem. The effectiveness of the insulation with the PCM is evaluated by comparing the heat loss to insulation without a PCM. The effect of the PCM type, the PCM layer thickness, and temperature cycle of the inner surface is studied. The results indicate that heat loss is reduced significantly when the PCM layer is used for a significant amount of time, and the heat loss is reduced more when the quantity of the PCM is increased. The temperature cycle has an insignificant influence on the thermal performance of the insulation with the PCM.Keywords
This publication has 15 references indexed in Scilit:
- Thermal Insulation for a Pipe Using Phase Change MaterialHeat Transfer Engineering, 2005
- Thermal regulation of building-integrated photovoltaics using phase change materialsInternational Journal of Heat and Mass Transfer, 2004
- Optimum interior area thermal resistance model to analyze the heat transfer characteristics of an insulated pipe with arbitrary shapeEnergy Conversion and Management, 2003
- Optimization of Multilayer Thermal Insulation for PipelinesHeat Transfer Engineering, 2000
- Thermal Behavior of Insulated Electric Wires Producing Pulsating SignalsHeat Transfer Engineering, 1999
- Thermal performance of a pcm storage unitEnergy Conversion and Management, 1999
- Thermal performance of a latent heat energy storage ventilated panel for electric load managementInternational Journal of Heat and Mass Transfer, 1999
- Two Fundamental Problems of Refrigerator Thermal Insulation DesignHeat Transfer Engineering, 1994
- Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tubeInternational Journal of Heat and Mass Transfer, 1993
- Optimum layered distribution of masonry and insulation of a building componentInternational Journal of Energy Research, 1991