A Universal Criterion for Plastic Yielding of Metallic Glasses with aTemperature Dependence
Top Cited Papers
- 3 November 2005
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 95 (19), 195501
- https://doi.org/10.1103/physrevlett.95.195501
Abstract
Room temperature (TR) elastic constants and compressive yield strengths of approximately 30 metallic glasses reveal an average shear limit gammaC=0.0267+/-0.0020, where tauY=gamma CG is the maximum resolved shear stress at yielding, and G the shear modulus. The gammaC values for individual glasses are correlated with t=TR/Tg , and gamma C for a single glass follows the same correlation (vs t=T/Tg). A cooperative shear model, inspired by Frenkel's analysis of the shear strength of solids, is proposed. Using a scaling analysis leads to a universal law tauCT/G=gammaC0-gammaC1(t)2/3 for the flow stress at finite T where gammaC0=(0.036+/-0.002) and gammaC1=(0.016+/-0.002).Keywords
This publication has 47 references indexed in Scilit:
- Dynamics of shear-transformation zones in amorphous plasticity: Formulation in terms of an effective disorder temperaturePhysical Review E, 2004
- Pressure-dependent flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glassJournal of Materials Research, 2003
- Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metalPhilosophical Magazine A, 2002
- Dynamics of viscoplastic deformation in amorphous solidsPhysical Review E, 1998
- A yield criterion for Pd40Ni40P20 metallic glassActa Metallurgica, 1989
- Development of visco-plastic deformation in metallic glassesActa Metallurgica, 1983
- Strain localization in amorphous metalsActa Metallurgica, 1982
- Plastic deformation in metallic glassesActa Metallurgica, 1979
- A microscopic mechanism for steady state inhomogeneous flow in metallic glassesActa Metallurgica, 1977
- Zur Theorie der Elastizit tsgrenze und der Festigkeit kristallinischer K rperThe European Physical Journal A, 1926