Large-scale synthesis of copper nanoparticles by chemically controlled reduction for applications of inkjet-printed electronics
- 4 September 2008
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 19 (41), 415604
- https://doi.org/10.1088/0957-4484/19/41/415604
Abstract
Copper nanoparticles are being given considerable attention as of late due to their interesting properties and potential applications in many areas of industry. One such exploitable use is as the major constituent of conductive inks and pastes used for printing various electronic components. In this study, copper nanoparticles were synthesized through a relatively large-scale (5 l), high-throughput (0.2 M) process. This facile method occurs through the chemical reduction of copper sulfate with sodium hypophosphite in ethylene glycol within the presence of a polymer surfactant (PVP), which was included to prevent aggregation and give dispersion stability to the resulting colloidal nanoparticles. Reaction yields were determined to be quantitative while particle dispersion yields were between 68 and 73%. The size of the copper nanoparticles could be controlled between 30 and 65 nm by varying the reaction time, reaction temperature, and relative ratio of copper sulfate to the surfactant. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) images of the particles revealed a spherical shape within the reported size regime, and x-ray analysis confirmed the formation of face-centered cubic (FCC) metallic copper. Furthermore, inkjet printing nanocopper inks prepared from the polymer-stabilized copper nanoparticles onto polyimide substrates resulted in metallic copper traces with low electrical resistivities (≥3.6 µΩ cm, or ≥2.2 times the resistivity of bulk copper) after a relatively low-temperature sintering process (200 °C for up to 60 min).Keywords
This publication has 16 references indexed in Scilit:
- Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processingSensors and Actuators A: Physical, 2007
- Synthesis of highly concentrated silver nanosol and its application to inkjet printingColloids and Surfaces A: Physicochemical and Engineering Aspects, 2005
- All jet-printed polymer thin-film transistor active-matrix backplanesApplied Physics Letters, 2004
- Formation of Cu and Cu2O Nanoparticles by Variation of the Surface Ligand: Preparation, Structure, and Insulating-to-Metallic TransitionJournal of Colloid and Interface Science, 2002
- Fine-line conductor manufacturing using drop-on demand PZT printing technologyIEEE Transactions on Electronics Packaging Manufacturing, 2002
- Ink-jet printed nanoparticle microelectromechanical systemsJournal of Microelectromechanical Systems, 2002
- Inkjet Printing for Materials and DevicesChemistry of Materials, 2001
- High-Resolution Inkjet Printing of All-Polymer Transistor CircuitsScience, 2000
- Inkjet printed copper source/drain metallization for amorphous silicon thin-film transistorsIEEE Electron Device Letters, 2000
- Color filter technology for liquid crystal displaysDisplays, 1999