Wireless Measurement System for Structural Health Monitoring With High Time-Synchronization Accuracy
Open Access
- 26 October 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 61 (3), 801-810
- https://doi.org/10.1109/tim.2011.2170889
Abstract
Structural health monitoring (SHM) systems have excellent potential to improve the regular operation and maintenance of structures. Wireless networks (WNs) have been used to avoid the high cost of traditional generic wired systems. The most important limitation of SHM wireless systems is time-synchronization accuracy, scalability, and reliability. A complete wireless system for structural identification under environmental load is designed, implemented, deployed, and tested on three different real bridges. Our contribution ranges from the hardware to the graphical front end. System goal is to avoid the main limitations of WNs for SHM particularly in regard to reliability, scalability, and synchronization. We reduce spatial jitter to 125 ns, far below the 120 μs required for high-precision acquisition systems and much better than the 10-μs current solutions, without adding complexity. The system is scalable to a large number of nodes to allow for dense sensor coverage of real-world structures, only limited by a compromise between measurement length and mandatory time to obtain the final result. The system addresses a myriad of problems encountered in a real deployment under difficult conditions, rather than a simulation or laboratory test bed.Keywords
This publication has 9 references indexed in Scilit:
- A Synchronized Wireless Sensor Network for Experimental Modal Analysis in Structural Health MonitoringComputer-Aided Civil and Infrastructure Engineering, 2011
- Automated decentralized modal analysis using smart sensorsStructural Control and Health Monitoring, 2010
- Finite element model updating and structural damage identification using OMAX dataMechanical Systems and Signal Processing, 2010
- Wireless Intelligent Sensor and Actuator Network - A Scalable Platform for Time-synchronous Applications of Structural Health MonitoringStructural Health Monitoring, 2010
- The effect of time synchronization of wireless sensors on the modal analysis of structuresSmart Materials and Structures, 2008
- A Summary Review of Wireless Sensors and Sensor Networks for Structural Health MonitoringThe Shock and Vibration Digest, 2006
- The flooding time synchronization protocolPublished by Association for Computing Machinery (ACM) ,2004
- Timing-sync protocol for sensor networksPublished by Association for Computing Machinery (ACM) ,2003
- Fine-grained network time synchronization using reference broadcastsPublished by Association for Computing Machinery (ACM) ,2002