Convective Transport in Nanofluids
Top Cited Papers
- 15 August 2005
- journal article
- Published by ASME International in Journal of Heat Transfer
- Vol. 128 (3), 240-250
- https://doi.org/10.1115/1.2150834
Abstract
Nanofluids are engineered colloids made of a base fluid and nanoparticles (1-100nm). Nanofluids have higher thermal conductivity and single-phase heat transfer coefficients than their base fluids. In particular, the heat transfer coefficient increases appear to go beyond the mere thermal-conductivity effect, and cannot be predicted by traditional pure-fluid correlations such as Dittus-Boelter’s. In the nanofluid literature this behavior is generally attributed to thermal dispersion and intensified turbulence, brought about by nanoparticle motion. To test the validity of this assumption, we have considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid. These are inertia, Brownian diffusion, thermophoresis, diffusiophoresis, Magnus effect, fluid drainage, and gravity. We concluded that, of these seven, only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids. Based on this finding, we developed a two-component four-equation nonhomogeneous equilibrium model for mass, momentum, and heat transport in nanofluids. A nondimensional analysis of the equations suggests that energy transfer by nanoparticle dispersion is negligible, and thus cannot explain the abnormal heat transfer coefficient increases. Furthermore, a comparison of the nanoparticle and turbulent eddy time and length scales clearly indicates that the nanoparticles move homogeneously with the fluid in the presence of turbulent eddies, so an effect on turbulence intensity is also doubtful. Thus, we propose an alternative explanation for the abnormal heat transfer coefficient increases: the nanofluid properties may vary significantly within the boundary layer because of the effect of the temperature gradient and thermophoresis. For a heated fluid, these effects can result in a significant decrease of viscosity within the boundary layer, thus leading to heat transfer enhancement. A correlation structure that captures these effects is proposed.Keywords
This publication has 21 references indexed in Scilit:
- Heat transfer behaviours of nanofluids in a uniformly heated tubeSuperlattices and Microstructures, 2004
- Evaluation of the Temperature Oscillation Technique to Calculate Thermal Conductivity of Water and Systematic Measurement of the Thermal Conductivity of Aluminum Oxide – Water NanofluidPublished by ASME International ,2004
- Temperature Dependence of Thermal Conductivity Enhancement for NanofluidsJournal of Heat Transfer, 2003
- Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticlesApplied Physics Letters, 2001
- Thermal Conductivity of Nanoparticle - Fluid MixtureJournal of Thermophysics and Heat Transfer, 1999
- Measuring Thermal Conductivity of Fluids Containing Oxide NanoparticlesJournal of Heat Transfer, 1999
- HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLESExperimental Heat Transfer, 1998
- Alteration of Thermal Conductivity and Viscosity of Liquid by Dispersing Ultra-Fine Particles. Dispersion of Al2O3, SiO2 and TiO2 Ultra-Fine Particles.Netsu Bussei, 1993
- The effect of Brownian motion on the bulk stress in a suspension of spherical particlesJournal of Fluid Mechanics, 1977
- The Viscosity of Concentrated Suspensions and SolutionsThe Journal of Chemical Physics, 1952