Toxic Combustion Product Yields as a Function of Equivalence Ratio and Flame Retardants in Under-Ventilated Fires: Bench-Large-Scale Comparisons
Open Access
- 3 September 2016
- Vol. 8 (9), 330
- https://doi.org/10.3390/polym8090330
Abstract
In large-scale compartment fires; combustion product yields vary with combustion conditions mainly in relation to the fuel:air equivalence ratio (Φ) and the effects of gas-phase flame retardants. Yields of products of inefficient combustion; including the major toxic products CO; HCN and organic irritants; increase considerably as combustion changes from well-ventilated (Φ < 1) to under-ventilated (Φ = 1–3). It is therefore essential that bench-scale toxicity tests reproduce this behaviour across the Φ range. Yield data from repeat compartment fire tests for any specific fuel show some variation on either side of a best-fit curve for CO yield as a function of Φ. In order to quantify the extent to which data from the steady state tube furnace (SSTF [1]; ISO TS19700 [2]) represents compartment fire yields; the range and average deviations of SSTF data for CO yields from the compartment fire best-fit curve were compared to those for direct compartment fire measurements for six different polymeric fuels with textile and non-textile applications and for generic post-flashover fire CO yield data. The average yields; range and standard deviations of the SSTF data around the best-fit compartment fire curves were found to be close to those for the compartment fire data. It is concluded that SSTF data are as good a predictor of compartment fire yields as are repeat compartment fire test data.Funding Information
- COST (COST MP1105)
This publication has 10 references indexed in Scilit:
- SFPE Handbook of Fire Protection EngineeringPublished by Springer Science and Business Media LLC ,2016
- Repeatability and reproducibility of the ISO/TS 19700 steady state tube furnaceFire Safety Journal, 2013
- HCN yields and fate of fuel nitrogen for materials under different combustion conditions in the ISO 19700 tube furnace and large -scale firesFire Safety Science, 2008
- The effect of temperature and ventilation condition on the toxic product yields from burning polymersFire and Materials, 2007
- Combustion products generated by hetero-organic fuels on four different fire test scalesFire Safety Journal, 2005
- Characterization of the combustion products in large‐scale fire tests: comparison of three experimental configurationsFire and Materials, 2001
- Toxic product yields and hazard assessment for fully enclosed design firesPolymer International, 2000
- The global equivalence ratio concept and the formation mechanisms of carbon monoxide in enclosure fires,Progress in Energy and Combustion Science, 1995
- The phi meter: A simple, fuel-independent instrument for monitoring combustion equivalence ratioReview of Scientific Instruments, 1994
- Carbon Monoxide Production in Compartment FiresJournal of Fire Protection Engineering, 1992