Heavy metals and its chemical speciation in sewage sludge at different stages of processing
- 18 October 2015
- journal article
- research article
- Published by Taylor & Francis Ltd in Environmental Technology
- Vol. 37 (7), 899-908
- https://doi.org/10.1080/09593330.2015.1090482
Abstract
The analysis of heavy metal concentrations and forms in sewage sludge constitutes an important issue in terms of both health and environmental hazards the metals pose. The total heavy metals concentration enables only the assessment of its contamination. Hence the knowledge of chemical forms is required to determine their environmental mobility and sludge final disposal. Heavy metals speciation was studied by using four-stage sequential extraction BCR (Community Bureau of Reference). This study was aimed at determining the total concentration of selected heavy metals (Zn, Cu, Ni, Pb, Cd, Cr and Hg) and their chemical forms (except for Hg) in sludge collected at different stages of its processing at two municipal Wastewater Treatment Plants in southern Poland. Metals contents in sludge samples were determined by using flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS). This study shows that Zn and Cu appeared to be the most abundant in sludge, while Cd and Hg were in the lowest concentrations. The sewage sludge revealed the domination of immobile fractions over the mobile ones. The oxidizable and residual forms were dominant for all the heavy metals. There was also a significant difference in metals speciation between sludges of different origin which was probably due to differences in wastewater composition and processes occurring in biological stage of wastewater treatment. The results indicate a negligible capability of metals to migrate from sludge into the environment. Our research revealed a significant impact of thickening, stabilization and hygienization on the distribution of heavy metals in sludge and their mobility.Keywords
Funding Information
- “Doktoris-Scholarship Program for innovative Silesia” co-financed by the European Union under the European Social Fund (100127)
This publication has 25 references indexed in Scilit:
- Total concentrations and different fractions of heavy metals in sewage sludge from Guangzhou, ChinaTransactions of Nonferrous Metals Society of China, 2013
- Heavy metal concentration and speciation of seven representative municipal sludges from wastewater treatment plants in Northeast ChinaEnvironmental Monitoring and Assessment, 2011
- Heavy metal fractionation during the co-composting of biosolids, deinking paper fibre and green wasteBioresource Technology, 2009
- Total concentrations and speciation of heavy metals in municipal sludge from Changsha, Zhuzhou and Xiangtan in middle-south region of ChinaJournal of Hazardous Materials, 2008
- Distribution of extractable fractions of heavy metals in sludge during the wastewater treatment processJournal of Hazardous Materials, 2006
- Heavy metal speciation and phytotoxic effects of three representative sewage sludges for agricultural usesEnvironmental Pollution, 2006
- Occurrence and fate of heavy metals in the wastewater treatment processChemosphere, 2003
- Application of a modified BCR sequential extraction (three-step) procedure for the determination of extractable trace metal contents in a sewage sludge amended soil reference material (CRM 483), complemented by a three-year stability study of acetic acid and EDTA extractable metal contentJournal of Environmental Monitoring, 2000
- Speciation of Heavy Metals in Soils and Sediments. An Account of the Improvement and Harmonization of Extraction Techniques Undertaken Under the Auspices of the BCR of the Commission of the European CommunitiesInternational Journal of Environmental Analytical Chemistry, 1993
- Sequential extraction procedure for the speciation of particulate trace metalsAnalytical Chemistry, 1979